Hi Simon,
some comments on return values and error reporting below:
On Wed, 15 Oct 2014 02:05:31 -0600
Simon Glass <s...@chromium.org> wrote:
...
> diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
> index 53f9b34..afac3f9 100644
> --- a/board/amcc/sequoia/sequoia.c
> +++ b/board/amcc/sequoia/sequoia.c
> @@ -10,6 +10,7 @@
> */
>
> #include <common.h>
> +#include <errno.h>
> #include <libfdt.h>
> #include <fdt_support.h>
> #include <asm/ppc4xx.h>
> @@ -363,7 +364,7 @@ void board_pci_fixup_irq(struct pci_controller *hose,
> pci_dev_t dev)
> * On NAND-booting sequoia, we need to patch the chips select numbers
> * in the dtb (CS0 - NAND, CS3 - NOR)
> */
> -void ft_board_setup(void *blob, bd_t *bd)
> +int ft_board_setup(void *blob, bd_t *bd)
> {
> int rc;
> int len;
> @@ -381,7 +382,7 @@ void ft_board_setup(void *blob, bd_t *bd)
> prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
> if (prop == NULL) {
> printf("Unable to update NOR chip select for NAND booting\n");
> - return;
> + return -ENOSPC;
return -FDT_ERR_NOSPACE;
otherwise failure reporting of ft_board_setup() as added in the next
patch will output "<unknown error>".
...
> @@ -389,7 +390,7 @@ void ft_board_setup(void *blob, bd_t *bd)
> if (rc) {
> printf("Unable to update property NOR mappings, err=%s\n",
> fdt_strerror(rc));
> - return;
> + return -ENOSPC;
since the failure reporting will be added, it should be removed here:
printf("Unable to update property NOR mappings\n");
return rc;
...
> @@ -398,7 +399,7 @@ void ft_board_setup(void *blob, bd_t *bd)
> prop = fdt_get_property_w(blob, nodeoffset, "reg", &len);
> if (prop == NULL) {
> printf("Unable to update NDFC chip select for NAND booting\n");
> - return;
> + return -ENOSPC;
return -FDT_ERR_NOSPACE;
...
> @@ -406,7 +407,9 @@ void ft_board_setup(void *blob, bd_t *bd)
> if (rc) {
> printf("Unable to update property NDFC mappings, err=%s\n",
> fdt_strerror(rc));
> - return;
> + return -ENOSPC;
printf("Unable to update property NDFC mappings\n");
return rc;
...
> diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
> b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
> index aba4f53..e1883ea 100644
> --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
> +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
> @@ -6,6 +6,7 @@
>
> #include <common.h>
> #include <command.h>
> +#include <errno.h>
> #include <asm/processor.h>
> #include <asm/mmu.h>
> #include <asm/cache.h>
> @@ -234,7 +235,7 @@ int board_eth_init(bd_t *bis)
> #if defined(CONFIG_OF_BOARD_SETUP)
> extern void ft_pci_board_setup(void *blob);
>
> -void ft_board_setup(void *blob, bd_t *bd)
> +int ft_board_setup(void *blob, bd_t *bd)
> {
> const char *soc_usb_compat = "fsl-usb2-dr";
> int err, usb1_off, usb2_off;
> @@ -266,14 +267,14 @@ void ft_board_setup(void *blob, bd_t *bd)
> printf("WARNING: could not find compatible node"
> " %s: %s.\n", soc_elbc_compat,
> fdt_strerror(off));
> - return;
> + return -ENOENT;
printf("WARNING: could not find compatible node %s\n", soc_elbc_compat);
return off;
> }
> err = fdt_del_node(blob, off);
> if (err < 0) {
> printf("WARNING: could not remove %s: %s.\n",
> soc_elbc_compat, fdt_strerror(err));
> }
> - return;
> + return -ENOSPC;
if (err < 0) {
printf("WARNING: could not remove %s\n", soc_elbc_compat);
return err;
}
return 0;
> }
> #endif
> /* Delete USB2 node as it is muxed with eLBC */
> @@ -283,7 +284,7 @@ void ft_board_setup(void *blob, bd_t *bd)
> printf("WARNING: could not find compatible node"
> " %s: %s.\n", soc_usb_compat,
> fdt_strerror(usb1_off));
> - return;
> + return -ENOSPC;
printf("WARNING: could not find compatible node %s\n", soc_usb_compat);
return usb1_off;
> }
> usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
> soc_usb_compat);
> @@ -291,11 +292,16 @@ void ft_board_setup(void *blob, bd_t *bd)
> printf("WARNING: could not find compatible node"
> " %s: %s.\n", soc_usb_compat,
> fdt_strerror(usb2_off));
> - return;
> + return -ENOSPC;
printf("WARNING: could not find compatible node %s\n", soc_usb_compat);
return usb2_off;
> }
> err = fdt_del_node(blob, usb2_off);
> - if (err < 0)
> + if (err < 0) {
> printf("WARNING: could not remove %s: %s.\n",
> soc_usb_compat, fdt_strerror(err));
> + return -EINVAL;
printf("WARNING: could not remove %s\n", soc_usb_compat);
return err;
> + }
> +
> + return 0;
> }
> +
> #endif
...
> diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> index a6756c6..5a0b41d 100644
> --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> @@ -6,6 +6,7 @@
>
> #include <common.h>
> #include <command.h>
> +#include <errno.h>
> #include <hwconfig.h>
> #include <pci.h>
> #include <i2c.h>
> @@ -424,7 +425,7 @@ static void fdt_board_fixup_qe_pins(void *blob)
> #endif
>
> #ifdef CONFIG_OF_BOARD_SETUP
> -void ft_board_setup(void *blob, bd_t *bd)
> +int ft_board_setup(void *blob, bd_t *bd)
> {
> phys_addr_t base;
> phys_size_t size;
> @@ -462,14 +463,15 @@ void ft_board_setup(void *blob, bd_t *bd)
> printf("WARNING: could not find compatible node %s:
> %s.\n",
> soc_elbc_compat,
> fdt_strerror(off));
> - return;
> + return -ENOENT;
printf("WARNING: could not find compatible node %s\n", soc_elbc_compat);
return off;
> }
> err = fdt_del_node(blob, off);
> if (err < 0) {
> printf("WARNING: could not remove %s: %s.\n",
> soc_elbc_compat, fdt_strerror(err));
> + return -EINVAL;
printf("WARNING: could not remove %s\n", soc_elbc_compat);
return err;
> }
> - return;
> + return 0;
> }
> #endif
>
> @@ -480,7 +482,7 @@ void ft_board_setup(void *blob, bd_t *bd)
> printf("WARNING: could not find compatible node %s: %s.\n",
> soc_usb_compat,
> fdt_strerror(usb1_off));
> - return;
> + return -ENOENT;
printf("WARNING: could not find compatible node %s\n", soc_usb_compat);
return usb1_off;
> }
> usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
> soc_usb_compat);
> @@ -488,13 +490,15 @@ void ft_board_setup(void *blob, bd_t *bd)
> printf("WARNING: could not find compatible node %s: %s.\n",
> soc_usb_compat,
> fdt_strerror(usb2_off));
> - return;
> + return -ENOENT;
printf("WARNING: could not find compatible node %s\n", soc_usb_compat);
return usb2_off;
> }
> err = fdt_del_node(blob, usb2_off);
> if (err < 0) {
> printf("WARNING: could not remove %s: %s.\n",
> soc_usb_compat, fdt_strerror(err));
> + return -EINVAL;
printf("WARNING: could not remove %s\n", soc_usb_compat);
return err;
Thanks,
Anatolij
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
