In SD boot, the magic number of u-boot image will be checked.
For LS102xA, u-boot.bin doesn't have the magic number. So use
u-boot.img which includes the magic number instead of u-boot.bin
when producing u-boot-with-spl-pbl.bin.
Signed-off-by: Alison Wang <alison.w...@freescale.com>
---
Change log:
v3: No change.
v2: No change.
Makefile | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 164929e..f22d767 100644
--- a/Makefile
+++ b/Makefile
@@ -969,10 +969,16 @@ MKIMAGEFLAGS_u-boot-spl.pbl = -n
$(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary
--pad-to=$(CONFIG_SPL_PAD_TO) \
--gap-fill=0xff
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
$(call if_changed,pad_cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
