> Did you check the GMII interface (H/W)? > Like EC_GTX_CLK125, this signal is input for TSEC block for > 1000Mbps case. > When you used the 100Mbps, the GTX_CLK125 is not used. Because you are > Using the MII interface for 100Mbps case.
IIRC, the MV88E1111 has some h/w config option to configure something such like interface mode, enable/disable 125MHz clock...if you are using the 125MHz of PHY acts as source of GTX_CLK125. you need care it. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
