On Tuesday 02 June 2009 15:02:17 Cote, Sylvain wrote: > > In my side: > > MTD0 (720kB): U-boot > > MTD1 (80kB) : env. Variables > > MTD2 (12MB) : kernel + initramfs > > MTD3 (50MB) : rootfs > > Maybe it will not help you but I have > > MTD0 (all the nand 256M) > MTD1 uboot+ embedded config 2M RAW > MTD2 1M JFFS2 > MTD5 config 5M JFFS2 > MTD3 Kernel + initramfs 12M JFFS2 > MTD4 KernelBKp 12M JFFS2 > MTD5 content 224M > > Scanning and fsload of the MTD3 partition take 3 seconds with 2009.03 > With 1.3.4 it was something like 6-10 seconds. But never 1 minute. I have > seen that when scanning the content partition of 224M.
Parameters like I-cache and D-cache handling greatly effect this scan time. Some platforms have caches enabled others don't. This might explain some differences here. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
