This collection of patches comprises a set of updates that have been lingering in our Github repository.
We're pushing them to main-line in preparation for the addition of a couple of boards that have also been lingering for a while. Patches 1-9 are tweaks to the mx6qsabrelite/nitrogen6x initialization code. Patches 10-18 add support for additional displays supported by the board(s) and tweak the HDMI detection. Patches 19-32 enable and configure various features through changes to include/configs/nitrogen6x.h. Diego Rondini (1): nitrogen6x: config: allow boot to USB stick Eric Nelson (24): nitrogen6x: implement board_cfb_skip() to disable text output nitrogen6x: configure SD2 pads for SDIO on USDHC2 nitrogen6x: power-down miscellanous peripherals nitrogen6x: staticize board file nitrogen6x: Allow U-Boot to be silent on UART2 nitrogen6x: prevent warnings about board_ehci* callbacks nitrogen6x: display: add qvga panel nitrogen6x: display: add support for LG-9.7 LVDS display nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays nitrogen6x: display: add support for fusion 7 display nitrogen6x: display: add svga display (800x600) nitrogen6x: display: add Ampire 1024x600 panel nitrogen6x: display: add wvga-lvds panel nitrogen6x: display use I2C detect for HDMI nitrogen6x: config: add USB Mass Storage (ums) support nitrogen6x: config: add initrd_high nitrogen6x: config: expose SATA, then MMC over USB nitrogen6x: config: enable USB keyboard support nitrogen6x: config: add CONFIG_CMD_MEMTEST nitrogen6x: config: enable "i2c edid" nitrogen6x: config: disable logo nitrogen6x: config: configure usb_ether nitrogen6x: config: add gpio command nitrogen6x: config: enable Android fastboot Kevin Mihelich (2): nitrogen6x: config: use FS_GENERIC load command nitrogen6x: config: enable EXT4 filesystem Robert Winkler (1): nitrogen6x: display: add support lvds jeida screen Troy Kisky (4): nitrogen6x: simplify board_mmc_getcd nitrogen6x: configure SGTL5000, CSI camera clock outputs nitrogen6x: phy: add 100 us delay after phy reset nitrogen6x: config: allow more bootargs parameters board/boundary/nitrogen6x/nitrogen6x.c | 298 +++++++++++++++++++++++++++++---- include/configs/nitrogen6x.h | 98 +++++++++-- 2 files changed, 347 insertions(+), 49 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
