Hello Andy,

Am 29.09.2014 18:40, schrieb Andy Pont:
Hello,

Using the patches from Bo Shen to support the NOR flash on the Atmel

which patches?

SAMA5D31EK hardware platform I am trying to get a UBI root file system
within the NOR flash, at offset 0x10000000 in the memory map, to work but
get errors from the "ubi part" command using U-Boot 2014.04:

U-Boot>  mtdparts

device nor0<physmap-flash.0>, # parts = 5
  #: name                size            offset          mask_flags
  0: bootstrap           0x00020000      0x00000000      1
  1: u-boot              0x000c0000      0x00020000      1
  2: fdt                 0x00020000      0x000e0000      0
  3: kernel              0x00400000      0x00100000      0
  4: rootfs              0x00a00000      0x00500000      0

active partition: nor0,0 - (bootstrap) 0x00020000 @ 0x00000000

defaults:
mtdids  : nor0=physmap-flash.0
mtdparts:
mtdparts=physmap-flash.0:128k(bootstrap)ro,768k(u-boot)ro,128k(fdt),4m(kerne
l),10m(rootfs)

U-Boot>  ubi part rootfs
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    130944 bytes
UBI: smallest flash I/O unit:    1
UBI: VID header offset:          64 (aligned 64)
UBI: data offset:                128
UBI error: vtbl_check: volume table check failed: record 0, error 9

seems ubi does not find the volume table ... could you activate
ubi error messages ubi_err() ?

UBI error: ubi_init: cannot attach mtd2
UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
UBI init error 22

The UBI settings are:

(2048) Image Size
(130944) Logical Erase Block Size
(1)   Minimum I/O Size
[ ]   mkfs.ubifs Space Fixup
()    mkfs.ubifs Options

*** UBI Image Properties ***
[*]   Create UBI Volume
(10MiB) Root File System Volume Size
(128 KiB) Physical Erase Block Size
(1)     Sub-page Size
()      ubinize Configuration File
()      ubinize Options

Any ideas as to what I have missed?

Did the ubi partition work under linux? Did you tried current ML
U-Boot (there MTD/UBI and UBIFS is synced with linux 3.15) ...

bye,
Heiko
--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to