Provide suitable platform data for am33xx boards, so that these boards can
use driver model for serial.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/cpu/armv7/am33xx/board.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/cpu/armv7/am33xx/board.c
b/arch/arm/cpu/armv7/am33xx/board.c
index 7aa8198..29b1d73 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -11,6 +11,7 @@
#include <common.h>
#include <dm.h>
#include <errno.h>
+#include <ns16550.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
@@ -60,6 +61,38 @@ U_BOOT_DEVICES(am33xx_gpios) = {
#endif
};
+# ifndef CONFIG_OF_CONTROL
+/*
+ * TODO(s...@chromium.org): When we can move SPL serial to DM, we can remove
+ * the CONFIGs. At the same time, we should move this to the board files.
+ */
+static const struct ns16550_platdata am33xx_serial[] = {
+ { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK },
+# ifdef CONFIG_SYS_NS16550_COM2
+ { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK },
+# ifdef CONFIG_SYS_NS16550_COM3
+ { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK },
+# endif
+# endif
+};
+
+U_BOOT_DEVICES(am33xx_uarts) = {
+ { "serial_omap", &am33xx_serial[0] },
+# ifdef CONFIG_SYS_NS16550_COM2
+ { "serial_omap", &am33xx_serial[1] },
+# ifdef CONFIG_SYS_NS16550_COM3
+ { "serial_omap", &am33xx_serial[2] },
+ { "serial_omap", &am33xx_serial[3] },
+ { "serial_omap", &am33xx_serial[4] },
+ { "serial_omap", &am33xx_serial[5] },
+# endif
+# endif
+};
+# endif
+
#else
static const struct gpio_bank gpio_bank_am33xx[] = {
--
2.1.0.rc2.206.gedb03e5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
