On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:

+CC Lukasz, this is his turf.

> When download is ongoing, if the actual size of one transfer
> is not the same as BTYES_PER_DOT, which will cause the dot
> won't print anymore. Then it will let the user thinking it
> is stuck, actually it is transfering without dot printed.
> 
> So, improve the method to show the progress bar (print dot).
> 
> Signed-off-by: Bo Shen <voice.s...@atmel.com>
> ---
> 
>  drivers/usb/gadget/f_fastboot.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/gadget/f_fastboot.c
> b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..2f13bf0 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct
> usb_function *f) static struct f_fastboot *fastboot_func;
>  static unsigned int download_size;
>  static unsigned int download_bytes;
> +static unsigned int num_of_dot;
> 
>  static struct usb_endpoint_descriptor fs_ep_in = {
>       .bLength            = USB_DT_ENDPOINT_SIZE,
> @@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep,
> struct usb_request *req) req->length = ep->maxpacket;
>       }
> 
> -     if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
> +     if (download_bytes && ((download_bytes / BYTES_PER_DOT) > num_of_dot)) {
> +             num_of_dot = download_bytes / BYTES_PER_DOT;
>               putc('.');
> -             if (!(download_bytes % (74 * BYTES_PER_DOT)))
> +             if (!(num_of_dot % 74))
>                       putc('\n');
>       }
>       req->actual = 0;
> @@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct
> usb_request *req) strsep(&cmd, ":");
>       download_size = simple_strtoul(cmd, NULL, 16);
>       download_bytes = 0;
> +     num_of_dot = 0;

Make it a 'download_total' and log the total amount of bytes transferred 
please, 
that way it can be re-used for other purposes in the future ; for example for 
printing how much data were already transferred ;-)

Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to