Hi Guillaume,
On 09/11/2014 02:59 AM, Guillaume GARDET wrote:
> Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top)
> slot.
> This patch makes use of both slots instead of only one.
>
> Signed-off-by: Guillaume GARDET <guillaume.gar...@free.fr>
> Cc: Stefano Babic <sba...@denx.de>
> Cc: Eric Nelson <eric.nel...@boundarydevices.com>
>
> ---
> include/configs/nitrogen6x.h | 25 ++++++++++++++-----------
> 1 file changed, 14 insertions(+), 11 deletions(-)
>
> diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
> index d4b0ac9..2a1eb3b 100644
> --- a/include/configs/nitrogen6x.h
> +++ b/include/configs/nitrogen6x.h
> @@ -186,7 +186,7 @@
> "fdt_addr=0x18000000\0" \
> "boot_fdt=try\0" \
> "ip_dyn=yes\0" \
> - "mmcdev=0\0" \
> + "mmcdevs=0 1\0" \
> "mmcpart=1\0" \
> "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> @@ -238,16 +238,19 @@
> "fi;\0"
>
> #define CONFIG_BOOTCOMMAND \
> - "mmc dev ${mmcdev}; if mmc rescan; then " \
> - "if run loadbootscript; then " \
> - "run bootscript; " \
> - "else " \
> - "if run loaduimage; then " \
> - "run mmcboot; " \
> - "else run netboot; " \
> - "fi; " \
> - "fi; " \
> - "else run netboot; fi"
If you add one more loop here, you can get SATA support
and end up with something very close to the Nitrogen6x
configuration!
> + "for mmcdev in ${mmcdevs}; do " \
> + "mmc dev ${mmcdev}; " \
> + "if mmc rescan; then " \
> + "if run loadbootscript; then " \
> + "run bootscript; " \
> + "else " \
> + "if run loaduimage; then " \
> + "run mmcboot; " \
> + "fi; " \
> + "fi; " \
> + "fi; " \
> + "done; " \
> + "run netboot; "
> #else
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "console=ttymxc1\0" \
>
Reviewed-by: Eric Nelson <eric.nel...@boundarydevices.com>
Acked-by: Eric Nelson <eric.nel...@boundarydevices.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
