Siemens boards are now using DFU in fullspeed only. For
this CONFIG_USB_GADGET_DUALSPEED is undefined.
Signed-off-by: Heiko Schocher <h...@denx.de>
Cc: Tom Rini <tr...@ti.com>
Cc: Lukasz Majewski <l.majew...@samsung.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Liu Bin <b-...@ti.com>
Cc: Lukas Stockmann <lukas.stockm...@siemens.com>
---
On the siemens board this is needed because of a
protection circuit. The device is 24V AC powered,
if someone uses a non galvanically isolated transformer
and misswires it, it could burn down the USB host.
That's why we have a protection on the USB side which
limits the speed to 12Mbit/sec.
- changes for v2:
- get rid of config option CONFIG_DFU_FULLSPEED as Bin Liu
suggested.
---
include/configs/siemens-am33x-common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/siemens-am33x-common.h
b/include/configs/siemens-am33x-common.h
index b8fb77e..4dcd690 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -233,7 +233,7 @@
#define CONFIG_MUSB_GADGET
#define CONFIG_MUSB_PIO_ONLY
#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
-#define CONFIG_USB_GADGET_DUALSPEED
+#undef CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_MUSB_HOST
--
1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
