Spin table is at the very beginning of boot code. Each core has an individual
release address within the spin table, the ft_cpu_setup fn updates the
"cpu-release-addr" property of each cpu node with the corresponding release
address.
Also fix CPU_RELEASE_ADDR to point to secondary_boot_func.
Signed-off-by: York Sun <york...@freescale.com>
Signed-off-by: Arnab Basu <arnab.b...@freescale.com>
---
Change log
v3: no change
v2: Use individual spin table for each core by default
board/freescale/ls2085a/ls2085a.c | 2 ++
include/configs/ls2085a_common.h | 9 ++++++---
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/board/freescale/ls2085a/ls2085a.c
b/board/freescale/ls2085a/ls2085a.c
index a18db1d..3daa787 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2085a/ls2085a.c
@@ -88,6 +88,8 @@ void ft_board_setup(void *blob, bd_t *bd)
phys_addr_t base;
phys_size_t size;
+ ft_cpu_setup(blob, bd);
+
/* limit the memory size to bank 1 until Linux can handle 40-bit PA */
base = getenv_bootm_low();
size = getenv_bootm_size();
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index 2bd5a47..4c258ca 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -45,14 +45,16 @@
#define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */
-/* SMP Definitions */
-#define CPU_RELEASE_ADDR CONFIG_SYS_INIT_SP_ADDR
-
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
+/*
+ * SMP Definitions
+ */
+#define CPU_RELEASE_ADDR secondary_boot_func
+
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 12000000 /* 12MHz */
@@ -167,6 +169,7 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+#define CONFIG_ARCH_EARLY_INIT_R
/* Physical Memory Map */
/* fixme: these need to be checked against the board */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
