CPC1 is not being enabled by default as powerpc is supposed to
use only CPC2.
Though by editing hwconfig en_cpc option,
CPC1 can also be enabled
Signed-off-by: Shaveta Leekha <shav...@freescale.com>
Signed-off-by: Sandeep Singh <sand...@freescale.com>
---
Tested on B4860QDS
Changes in V2:
Inserted "en_cpc:cpc2" at right place,
not to broke into the settings for DDR
include/configs/B4860QDS.h | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 953d06b..6deb784 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -819,9 +819,16 @@ unsigned long get_board_ddr_clk(void);
#define __USB_PHY_TYPE ulpi
+#ifdef CONFIG_PPC_B4860
+#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \
+ "bank_intlv=cs0_cs1;" \
+ "en_cpc:cpc2;"
+#else
+#define HWCONFIG
"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:ctlr_intlv=null," \
- "bank_intlv=cs0_cs1;" \
+ HWCONFIG \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
--
1.7.6.GIT
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
