changes in v2:
        -added usb_ether.h to change list
        -added 2nd patch to enable driver for arndale board

Signed-off-by: Rene Griessl <rgrie...@cit-ec.uni-bielefeld.de>
---
 drivers/usb/eth/Makefile    |   3 +
 drivers/usb/eth/asix88179.c | 641 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/eth/usb_ether.c |   7 +
 include/usb_ether.h         |   6 +
 4 files changed, 657 insertions(+)
 create mode 100644 drivers/usb/eth/asix88179.c

diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile
index 94551c4..fad4acd 100644
--- a/drivers/usb/eth/Makefile
+++ b/drivers/usb/eth/Makefile
@@ -8,5 +8,8 @@ obj-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
 ifdef CONFIG_USB_ETHER_ASIX
 obj-y += asix.o
 endif
+ifdef CONFIG_USB_ETHER_ASIX_88179
+obj-y += asix88179.o
+endif
 obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o
 obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c
new file mode 100644
index 0000000..55cc48b
--- /dev/null
+++ b/drivers/usb/eth/asix88179.c
@@ -0,0 +1,641 @@
+/*
+ * Copyright (c) 2014 Rene Griessl <rgrie...@cit-ec.uni-bielefeld.de>
+ * based on the U-Boot Asix driver as well as information
+ * from the Linux AX88179 driver
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <usb.h>
+#include <net.h>
+#include <linux/mii.h>
+#include "usb_ether.h"
+#include <malloc.h>
+
+
+/* ASIX AX88179 based USB 3.0 Ethernet Devices */
+#define AX88179_PHY_ID                         0x03
+#define AX_EEPROM_LEN                          0x100
+#define AX88179_EEPROM_MAGIC                   0x17900b95
+#define AX_MCAST_FLTSIZE                       8
+#define AX_MAX_MCAST                           64
+#define AX_INT_PPLS_LINK                       ((u32)BIT(16))
+#define AX_RXHDR_L4_TYPE_MASK                  0x1c
+#define AX_RXHDR_L4_TYPE_UDP                   4
+#define AX_RXHDR_L4_TYPE_TCP                   16
+#define AX_RXHDR_L3CSUM_ERR                    2
+#define AX_RXHDR_L4CSUM_ERR                    1
+#define AX_RXHDR_CRC_ERR                       ((u32)BIT(29))
+#define AX_RXHDR_DROP_ERR                      ((u32)BIT(31))
+#define AX_ACCESS_MAC                          0x01
+#define AX_ACCESS_PHY                          0x02
+#define AX_ACCESS_EEPROM                       0x04
+#define AX_ACCESS_EFUS                         0x05
+#define AX_PAUSE_WATERLVL_HIGH                 0x54
+#define AX_PAUSE_WATERLVL_LOW                  0x55
+
+#define PHYSICAL_LINK_STATUS                   0x02
+       #define AX_USB_SS               0x04
+       #define AX_USB_HS               0x02
+
+#define GENERAL_STATUS                         0x03
+/* Check AX88179 version. UA1:Bit2 = 0,  UA2:Bit2 = 1 */
+       #define AX_SECLD                0x04
+
+#define AX_SROM_ADDR                           0x07
+#define AX_SROM_CMD                            0x0a
+       #define EEP_RD                  0x04
+       #define EEP_BUSY                0x10
+
+#define AX_SROM_DATA_LOW                       0x08
+#define AX_SROM_DATA_HIGH                      0x09
+
+#define AX_RX_CTL                              0x0b
+       #define AX_RX_CTL_DROPCRCERR    0x0100
+       #define AX_RX_CTL_IPE           0x0200
+       #define AX_RX_CTL_START         0x0080
+       #define AX_RX_CTL_AP            0x0020
+       #define AX_RX_CTL_AM            0x0010
+       #define AX_RX_CTL_AB            0x0008
+       #define AX_RX_CTL_AMALL         0x0002
+       #define AX_RX_CTL_PRO           0x0001
+       #define AX_RX_CTL_STOP          0x0000
+
+#define AX_NODE_ID                             0x10
+#define AX_MULFLTARY                           0x16
+
+#define AX_MEDIUM_STATUS_MODE                  0x22
+       #define AX_MEDIUM_GIGAMODE      0x01
+       #define AX_MEDIUM_FULL_DUPLEX   0x02
+       #define AX_MEDIUM_EN_125MHZ     0x08
+       #define AX_MEDIUM_RXFLOW_CTRLEN 0x10
+       #define AX_MEDIUM_TXFLOW_CTRLEN 0x20
+       #define AX_MEDIUM_RECEIVE_EN    0x100
+       #define AX_MEDIUM_PS            0x200
+       #define AX_MEDIUM_JUMBO_EN      0x8040
+
+#define AX_MONITOR_MOD                         0x24
+       #define AX_MONITOR_MODE_RWLC    0x02
+       #define AX_MONITOR_MODE_RWMP    0x04
+       #define AX_MONITOR_MODE_PMEPOL  0x20
+       #define AX_MONITOR_MODE_PMETYPE 0x40
+
+#define AX_GPIO_CTRL                           0x25
+       #define AX_GPIO_CTRL_GPIO3EN    0x80
+       #define AX_GPIO_CTRL_GPIO2EN    0x40
+       #define AX_GPIO_CTRL_GPIO1EN    0x20
+
+#define AX_PHYPWR_RSTCTL                       0x26
+       #define AX_PHYPWR_RSTCTL_BZ     0x0010
+       #define AX_PHYPWR_RSTCTL_IPRL   0x0020
+       #define AX_PHYPWR_RSTCTL_AT     0x1000
+
+#define AX_RX_BULKIN_QCTRL                     0x2e
+#define AX_CLK_SELECT                          0x33
+       #define AX_CLK_SELECT_BCS       0x01
+       #define AX_CLK_SELECT_ACS       0x02
+       #define AX_CLK_SELECT_ULR       0x08
+
+#define AX_RXCOE_CTL                           0x34
+       #define AX_RXCOE_IP             0x01
+       #define AX_RXCOE_TCP            0x02
+       #define AX_RXCOE_UDP            0x04
+       #define AX_RXCOE_TCPV6          0x20
+       #define AX_RXCOE_UDPV6          0x40
+
+#define AX_TXCOE_CTL                           0x35
+       #define AX_TXCOE_IP             0x01
+       #define AX_TXCOE_TCP            0x02
+       #define AX_TXCOE_UDP            0x04
+       #define AX_TXCOE_TCPV6          0x20
+       #define AX_TXCOE_UDPV6          0x40
+
+#define AX_LEDCTRL                             0x73
+
+#define GMII_PHY_PHYSR                         0x11
+       #define GMII_PHY_PHYSR_SMASK    0xc000
+       #define GMII_PHY_PHYSR_GIGA     0x8000
+       #define GMII_PHY_PHYSR_100      0x4000
+       #define GMII_PHY_PHYSR_FULL     0x2000
+       #define GMII_PHY_PHYSR_LINK     0x400
+
+#define GMII_LED_ACT                           0x1a
+       #define GMII_LED_ACTIVE_MASK    0xff8f
+       #define GMII_LED0_ACTIVE        BIT(4)
+       #define GMII_LED1_ACTIVE        BIT(5)
+       #define GMII_LED2_ACTIVE        BIT(6)
+
+#define GMII_LED_LINK                          0x1c
+       #define GMII_LED_LINK_MASK      0xf888
+       #define GMII_LED0_LINK_10       BIT(0)
+       #define GMII_LED0_LINK_100      BIT(1)
+       #define GMII_LED0_LINK_1000     BIT(2)
+       #define GMII_LED1_LINK_10       BIT(4)
+       #define GMII_LED1_LINK_100      BIT(5)
+       #define GMII_LED1_LINK_1000     BIT(6)
+       #define GMII_LED2_LINK_10       BIT(8)
+       #define GMII_LED2_LINK_100      BIT(9)
+       #define GMII_LED2_LINK_1000     BIT(10)
+       #define LED0_ACTIVE             BIT(0)
+       #define LED0_LINK_10            BIT(1)
+       #define LED0_LINK_100           BIT(2)
+       #define LED0_LINK_1000          BIT(3)
+       #define LED0_FD                 BIT(4)
+       #define LED0_USB3_MASK          0x001f
+       #define LED1_ACTIVE             BIT(5)
+       #define LED1_LINK_10            BIT(6)
+       #define LED1_LINK_100           BIT(7)
+       #define LED1_LINK_1000          BIT(8)
+       #define LED1_FD                 BIT(9)
+       #define LED1_USB3_MASK          0x03e0
+       #define LED2_ACTIVE             BIT(10)
+       #define LED2_LINK_1000          BIT(13)
+       #define LED2_LINK_100           BIT(12)
+       #define LED2_LINK_10            BIT(11)
+       #define LED2_FD                 BIT(14)
+       #define LED_VALID               BIT(15)
+       #define LED2_USB3_MASK          0x7c00
+
+#define GMII_PHYPAGE                           0x1e
+#define GMII_PHY_PAGE_SELECT                   0x1f
+       #define GMII_PHY_PGSEL_EXT      0x0007
+       #define GMII_PHY_PGSEL_PAGE0    0x0000
+
+
+/* local defines */
+#define ASIX_BASE_NAME "asx"
+#define USB_CTRL_SET_TIMEOUT 12000
+#define USB_CTRL_GET_TIMEOUT 12000
+#define USB_BULK_SEND_TIMEOUT 12000
+#define USB_BULK_RECV_TIMEOUT 12000
+
+#define AX_RX_URB_SIZE 1024 * 0x12
+#define PHY_CONNECT_TIMEOUT 12000
+
+#define FLAG_NONE                      0
+#define FLAG_TYPE_AX88179      (1U << 0)
+
+static int asix_send(struct eth_device *eth, void *packet, int length);
+
+
+/* local vars */
+
+static const struct {
+       unsigned char ctrl, timer_l, timer_h, size, ifg;
+} AX88179_BULKIN_SIZE[] =      {
+       {7, 0x4f, 0,    0x12, 0xff},
+       {7, 0x20, 3,    0x16, 0xff},
+       {7, 0xae, 7,    0x18, 0xff},
+       {7, 0xcc, 0x4c, 0x18, 8},
+};
+
+static int curr_eth_dev; /* index for name of next device detected */
+
+/* driver private */
+struct asix_private {
+       int flags;
+};
+
+/*
+ * Asix infrastructure commands
+ */
+static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
+                            u16 size, void *data)
+{
+       int len;
+
+       debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+             cmd, value, index, size);
+
+       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size);
+
+       memcpy(buf, data, size);
+
+       len = usb_control_msg(
+               dev->pusb_dev,
+               usb_sndctrlpipe(dev->pusb_dev, 0),
+               cmd,
+               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+               value,
+               index,
+               buf,
+               size,
+               USB_CTRL_SET_TIMEOUT);
+
+       return len == size ? 0 : -1;
+}
+
+static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
+                           u16 size, void *data)
+{
+       int len;
+
+       debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+             cmd, value, index, size);
+       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size);
+
+
+       len = usb_control_msg(
+               dev->pusb_dev,
+               usb_rcvctrlpipe(dev->pusb_dev, 0),
+               cmd,
+               USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+               value,
+               index,
+               buf,
+               size,
+               USB_CTRL_GET_TIMEOUT);
+
+       memcpy(data, buf, size);
+
+       return len == size ? 0 : -1;
+}
+
+static inline int asix_get_phy_addr(struct ueth_data *dev)
+{
+       ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 2);
+       int ret = -1;
+       if (dev->pusb_dev->descriptor.idProduct == 0x1790) {
+               ret = asix_read_cmd(dev, AX_ACCESS_MAC, 0x10, 6, 6, buf);
+               debug("asix_get_phy_addr() returning 
0x%02x%02x%02x%02x%02x%02x\n",
+                     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+               }
+       else {
+               }
+
+       return ret;
+}
+
+
+static int asix_read_mac(struct eth_device *eth)
+{
+       struct ueth_data *dev = (struct ueth_data *)eth->priv;
+       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN);
+
+       if (dev->pusb_dev->descriptor.idProduct == 0x1790) {
+               asix_read_cmd(dev, AX_ACCESS_MAC, 0x10, 6, 6, buf);
+               debug("asix_read_mac() returning 0x%02x%02x%02x%02x%02x%02x\n",
+                     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+               memcpy(eth->enetaddr, buf, ETH_ALEN);
+               }
+       return 0;
+}
+
+
+
+static int asix_basic_reset(struct ueth_data *dev)
+{
+       ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 6);
+       u16 *tmp16;
+       u8 *tmp;
+
+       tmp16 = (u16 *)buf;
+       tmp = (u8 *)buf;
+
+       /* Power up ethernet PHY */
+       *tmp16 = 0;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+
+       *tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+       mdelay(200);
+
+       *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+       mdelay(200);
+
+       /* RX bulk configuration */
+       memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+       /* Water Level configuration */
+       *tmp = 0x34;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+       *tmp = 0x52;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH, 1, 1, tmp);
+
+       /* Enable checksum offload */
+       *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+              AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+       *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+              AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+       /* Configure RX control register => start operation */
+       *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+                AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+       *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+              AX_MONITOR_MODE_RWMP;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+       /* Configure default medium type => giga */
+       *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+                AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+                AX_MEDIUM_GIGAMODE | AX_MEDIUM_JUMBO_EN;
+       asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16);
+
+       u16 adv = 0;
+       adv = ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_LPACK |
+               ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM | ADVERTISE_NPAGE;
+       asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_ADVERTISE, 2, &adv);
+
+       adv = ADVERTISE_1000FULL;
+       asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_CTRL1000, 2, &adv);
+
+       return 0;
+}
+
+/*
+ * Asix callbacks
+ */
+static int asix_init(struct eth_device *eth, bd_t *bd)
+{
+       struct ueth_data        *dev = (struct ueth_data *)eth->priv;
+       int timeout = 0;
+#define TIMEOUT_RESOLUTION 50  /* ms */
+       int link_detected;
+
+       ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 6);
+       u16 *tmp16;
+
+       tmp16 = (u16 *)buf;
+
+       debug("** %s()\n", __func__);
+
+
+       /* Configure RX control register => start operation */
+       *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+                AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+       if (asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16) < 0)
+               goto out_err;
+
+       do {
+               asix_read_cmd(dev, AX_ACCESS_PHY, 0x03, MII_BMSR, 2, buf);
+               link_detected = *tmp16 & BMSR_LSTATUS;
+               if (!link_detected) {
+                       if (timeout == 0)
+                               printf("Waiting for Ethernet connection... ");
+                       udelay(TIMEOUT_RESOLUTION * 1000);
+                       timeout += TIMEOUT_RESOLUTION;
+               }
+       } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
+       if (link_detected) {
+               if (timeout != 0)
+                       printf("done.\n");
+       } else {
+               printf("unable to connect.\n");
+               goto out_err;
+       }
+
+       return 0;
+out_err:
+       return -1;
+}
+
+static int asix_send(struct eth_device *eth, void *packet, int length)
+{
+       struct ueth_data *dev = (struct ueth_data *)eth->priv;
+       int err;
+       u32 packet_len, tx_hdr2;
+       int actual_len, buf_length;
+
+       buf_length = PKTSIZE + sizeof(packet_len) + sizeof(tx_hdr2);
+       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, buf_length);
+
+       debug("** %s(), len %d\n", __func__, length);
+
+       packet_len = length;
+       cpu_to_le32s(&packet_len);
+
+       memcpy(msg, &packet_len, sizeof(packet_len));
+
+       tx_hdr2 = 0;
+       if (((length + 8) % 0x200 /*frame_size*/) == 0)
+               tx_hdr2 |= 0x80008000;  /* Enable padding */
+
+       cpu_to_le32s(&tx_hdr2);
+
+       memcpy(msg + sizeof(packet_len), &tx_hdr2, sizeof(tx_hdr2));
+
+       memcpy(msg + sizeof(packet_len) + sizeof(tx_hdr2),
+              (void *)packet, length);
+
+       err = usb_bulk_msg(dev->pusb_dev,
+                               usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
+                               (void *)msg,
+                               length + sizeof(packet_len) + sizeof(tx_hdr2),
+                               &actual_len,
+                               USB_BULK_SEND_TIMEOUT);
+       debug("Tx: len = %u, actual = %u, err = %d\n",
+             length + sizeof(packet_len), actual_len, err);
+
+       return err;
+}
+
+static int asix_recv(struct eth_device *eth)
+{
+       struct ueth_data *dev = (struct ueth_data *)eth->priv;
+       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE);
+       u16 frame_pos;
+       int err;
+       int actual_len;
+
+       int pkt_cnt;
+       u32 rx_hdr;
+       u16 hdr_off;
+       u32 *pkt_hdr;
+
+       actual_len = -1;
+
+       debug("** %s()\n", __func__);
+
+       err = usb_bulk_msg(dev->pusb_dev,
+                               usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
+                               (void *)recv_buf,
+                               AX_RX_URB_SIZE,
+                               &actual_len,
+                               USB_BULK_RECV_TIMEOUT);
+       debug("Rx: len = %u, actual = %u, err = %d\n",
+             AX_RX_URB_SIZE, actual_len, err);
+
+       if (err != 0) {
+               debug("Rx: failed to receive\n");
+               return -1;
+       }
+       if (actual_len > AX_RX_URB_SIZE) {
+               debug("Rx: received too many bytes %d\n", actual_len);
+               return -1;
+       }
+
+
+       rx_hdr = *(u32 *)(recv_buf + actual_len - 4);
+       le32_to_cpus(&pkt_hdr);
+
+       pkt_cnt = (u16)rx_hdr;
+       hdr_off = (u16)(rx_hdr >> 16);
+       pkt_hdr = (u32 *)(recv_buf + hdr_off);
+
+
+       frame_pos = 0;
+
+       while (pkt_cnt--) {
+               u16 pkt_len;
+
+               le32_to_cpus(pkt_hdr);
+               pkt_len = (*pkt_hdr >> 16) & 0x1fff;
+
+               frame_pos += 2;
+
+               NetReceive(recv_buf + frame_pos, pkt_len);
+
+               pkt_hdr++;
+               frame_pos += ((pkt_len + 7) & 0xFFF8)-2;
+
+               if (pkt_cnt == 0)
+                       return 1;
+       }
+       return err;
+}
+
+static void asix_halt(struct eth_device *eth)
+{
+       debug("** %s()\n", __func__);
+}
+
+/*
+ * Asix probing functions
+ */
+void ax88179_eth_before_probe(void)
+{
+       curr_eth_dev = 0;
+}
+
+struct asix_dongle {
+       unsigned short vendor;
+       unsigned short product;
+       int flags;
+};
+
+static const struct asix_dongle asix_dongles[] = {
+       { 0x0b95, 0x1790, FLAG_TYPE_AX88179 },
+       { 0x0000, 0x0000, FLAG_NONE }   /* END - Do not remove */
+};
+
+/* Probe to see if a new device is actually an asix device */
+int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum,
+                     struct ueth_data *ss)
+{
+       struct usb_interface *iface;
+       struct usb_interface_descriptor *iface_desc;
+       int ep_in_found = 0, ep_out_found = 0;
+       int i;
+
+       /* let's examine the device now */
+       iface = &dev->config.if_desc[ifnum];
+       iface_desc = &dev->config.if_desc[ifnum].desc;
+
+       for (i = 0; asix_dongles[i].vendor != 0; i++) {
+               if (dev->descriptor.idVendor == asix_dongles[i].vendor &&
+                   dev->descriptor.idProduct == asix_dongles[i].product)
+                       /* Found a supported dongle */
+                       break;
+       }
+
+       if (asix_dongles[i].vendor == 0)
+               return 0;
+
+       memset(ss, 0, sizeof(struct ueth_data));
+
+       /* At this point, we know we've got a live one */
+       debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n",
+             dev->descriptor.idVendor, dev->descriptor.idProduct);
+
+       /* Initialize the ueth_data structure with some useful info */
+       ss->ifnum = ifnum;
+       ss->pusb_dev = dev;
+       ss->subclass = iface_desc->bInterfaceSubClass;
+       ss->protocol = iface_desc->bInterfaceProtocol;
+
+       /* alloc driver private */
+       ss->dev_priv = calloc(1, sizeof(struct asix_private));
+       if (!ss->dev_priv)
+               return 0;
+
+       ((struct asix_private *)ss->dev_priv)->flags = asix_dongles[i].flags;
+
+       /*
+        * We are expecting a minimum of 3 endpoints - in, out (bulk), and
+        * int. We will ignore any others.
+        */
+       for (i = 0; i < iface_desc->bNumEndpoints; i++) {
+               /* is it an BULK endpoint? */
+               if ((iface->ep_desc[i].bmAttributes &
+                    USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
+                       u8 ep_addr = iface->ep_desc[i].bEndpointAddress;
+                       if (ep_addr & USB_DIR_IN) {
+                               if (!ep_in_found) {
+                                       ss->ep_in = ep_addr &
+                                               USB_ENDPOINT_NUMBER_MASK;
+                                       ep_in_found = 1;
+                               }
+                       } else {
+                               if (!ep_out_found) {
+                                       ss->ep_out = ep_addr &
+                                               USB_ENDPOINT_NUMBER_MASK;
+                                       ep_out_found = 1;
+                               }
+                       }
+               }
+
+               /* is it an interrupt endpoint? */
+               if ((iface->ep_desc[i].bmAttributes &
+                   USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
+                       ss->ep_int = iface->ep_desc[i].bEndpointAddress &
+                               USB_ENDPOINT_NUMBER_MASK;
+                       ss->irqinterval = iface->ep_desc[i].bInterval;
+               }
+       }
+       debug("Endpoints In %d Out %d Int %d\n",
+             ss->ep_in, ss->ep_out, ss->ep_int);
+
+       /* Do some basic sanity checks, and bail if we find a problem */
+       if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
+           !ss->ep_in || !ss->ep_out || !ss->ep_int) {
+               debug("Problems with device\n");
+               return 0;
+       }
+       dev->privptr = (void *)ss;
+       return 1;
+}
+
+int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
+                               struct eth_device *eth)
+{
+       if (!eth) {
+               debug("%s: missing parameter.\n", __func__);
+               return 0;
+       }
+       sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++);
+       eth->init = asix_init;
+       eth->send = asix_send;
+       eth->recv = asix_recv;
+       eth->halt = asix_halt;
+       eth->priv = ss;
+
+       if (asix_basic_reset(ss))
+               return 0;
+
+       /* Get the MAC address */
+       if (asix_read_mac(eth))
+               return 0;
+       debug("MAC %pM\n", eth->enetaddr);
+
+       return 1;
+}
diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
index 1dda54c..59822a6 100644
--- a/drivers/usb/eth/usb_ether.c
+++ b/drivers/usb/eth/usb_ether.c
@@ -30,6 +30,13 @@ static const struct usb_eth_prob_dev prob_dev[] = {
                .get_info = asix_eth_get_info,
        },
 #endif
+#ifdef CONFIG_USB_ETHER_ASIX_88179
+       {
+               .before_probe = ax88179_eth_before_probe,
+               .probe = ax88179_eth_probe,
+               .get_info = ax88179_eth_get_info,
+       },
+#endif
 #ifdef CONFIG_USB_ETHER_MCS7830
        {
                .before_probe = mcs7830_eth_before_probe,
diff --git a/include/usb_ether.h b/include/usb_ether.h
index 35700a2..b38d037 100644
--- a/include/usb_ether.h
+++ b/include/usb_ether.h
@@ -49,6 +49,12 @@ int asix_eth_probe(struct usb_device *dev, unsigned int 
ifnum,
 int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
                      struct eth_device *eth);
 
+void ax88179_eth_before_probe(void);
+int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum,
+                     struct ueth_data *ss);
+int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
+                     struct eth_device *eth);
+
 void mcs7830_eth_before_probe(void);
 int mcs7830_eth_probe(struct usb_device *dev, unsigned int ifnum,
                      struct ueth_data *ss);
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to