On Tue, Aug 26, 2014 at 11:04:56AM -0600, Stephen Warren wrote:
> On 08/26/2014 09:33 AM, Thierry Reding wrote:
> >From: Thierry Reding <tred...@nvidia.com>
> >
> >Provide a new modifier to vsprintf() to print phys_addr_t variables to
> >avoid having to cast or #ifdef when printing them out. The %pa modifier
> >is used for this purpose, so phys_addr_t variables need to be passed by
> >reference, like so:
> >
> > phys_addr_t start = 0;
> >
> > printf("start: %pa\n", &start);
> >
> >Depending on the size of phys_addr_t this will print out the address
> >with 8 or 16 hexadecimal digits following a 0x prefix.
>
> The series,
>
> Tested-by: Stephen Warren <swar...@nvidia.com>
>
> Note that I did see the following printed a couple of times when I executed
> "run bootcmd_pxe":
>
> pci_hose_bus_to_phys: invalid physical address
>
> ... but everything worked perfectly, so I guess we can track that down
> later.Yes, it should definitely be tracked down. I don't see that message on my setup. I've seen it for example when noncached_alloc() fails and returns 0, but in that case everything shouldn't be working perfectly. It would be helpful if that message showed what physical address was considered invalid. Thierry
pgp2jHHgKZFHP.pgp
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
