On 14-06-26 01:13 PM, Steve Rae wrote:
This series implements the "fastboot flash" command for eMMC devices.
It supports both raw and sparse images.
NOTES:
- the support for the "fastboot flash" command is enabled with
CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for NAND would be enabled with
CONFIG_FASTBOOT_FLASH_NAND(???)
This has been tested on ARMv7.
Changes in v3:
- remove most references to 'mmc',
which leaves only one mmc specific function: mmc_get_dev()
Changes in v2:
- split large function into three
- improved handling of response messages
- additional partition size checking when writing sparse image
- update README.android-fastboot file
- new in v2
Steve Rae (4):
usb/gadget: fastboot: add sparse image definitions
usb/gadget: fastboot: add eMMC support for flash command
usb/gadget: fastboot: add support for flash command
usb/gadget: fastboot: minor cleanup
README | 10 +++
common/Makefile | 5 ++
common/fb_mmc.c | 190 ++++++++++++++++++++++++++++++++++++++++
doc/README.android-fastboot | 5 +-
drivers/usb/gadget/f_fastboot.c | 41 ++++++++-
include/fb_mmc.h | 8 ++
include/sparse_format.h | 58 ++++++++++++
7 files changed, 312 insertions(+), 5 deletions(-)
create mode 100644 common/fb_mmc.c
create mode 100644 include/fb_mmc.h
create mode 100644 include/sparse_format.h
Marek,
I notice that this patchset is assigned to you:
http://patchwork.ozlabs.org/patch/364705/
Has there been any progress?
Thanks, Steve
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
