Hi Andy, I also tried to boot Linux directly on my Zynq board. But I could not understand the instructions given in readme.falcon, so the project is stalled.
google *falcon mode U-boot , *you will find couple of presentations, and in doc you have readme.falcon.txt that explains this with an example. Since I also want to continue on this, so let us continue this discussion. Thanks and regards, Abdul Basit On 30 July 2014 12:13, Andy Pont <andy.p...@sdcsystems.com> wrote: > Hello! > > We are currently working on the specification for a project using the TI > AM335x where the overall system boot time has to be reduced as far as > possible. In order to achieve that I am proposing that we implement a > board > specific spl_start_uboot() function which under normal circumstances U-Boot > SPL will load the Linux kernel directly. > > One of the other requirements is to "display a splash screen logo on the > LCD > as early in the boot process as possible". Is it possible to get U-Boot > SPL > to do that or will we always have to boot through U-Boot or see if we can > get the Linux kernel to do it as early as possible? > > Thoughts and ideas welcome. > > Andy. > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
