Hi,
On 07/23/2014 08:02 PM, Siarhei Siamashka wrote:
On Mon, 9 Jun 2014 11:36:58 +0200
Hans de Goede <hdego...@redhat.com> wrote:
Add support for the Allwinner A13 and A10s SoCs also know as the Allwinner
sun5i family, and the A13-OLinuXinoM A13 based and r7-tv-dongle A10s based
boards.
The only differences compared to the already supported sun4i and sun7i
families are all in the DRAM controller initialization:
-Different hcpr values
-Different MBUS settings
-Some other small initialization changes
Signed-off-by: Henrik Nordstrom <hen...@henriknordstrom.net>
Signed-off-by: Stefan Roese <s...@denx.de>
Signed-off-by: Oliver Schinagl <oli...@schinagl.nl>
Signed-off-by: Hans de Goede <hdego...@redhat.com>
Acked-by: Ian Campbell <i...@hellion.org.uk>
---
arch/arm/cpu/armv7/sunxi/Makefile | 2 ++
arch/arm/cpu/armv7/sunxi/board.c | 12 ++++++++++++
arch/arm/cpu/armv7/sunxi/cpu_info.c | 8 ++++++++
arch/arm/cpu/armv7/sunxi/dram.c | 21 +++++++++++++++++++++
board/sunxi/Makefile | 2 ++
board/sunxi/dram_a13_oli_micro.c | 32 ++++++++++++++++++++++++++++++++
board/sunxi/dram_r7dongle.c | 31 +++++++++++++++++++++++++++++++
boards.cfg | 2 ++
include/configs/sun5i.h | 23 +++++++++++++++++++++++
include/configs/sunxi-common.h | 2 ++
10 files changed, 135 insertions(+)
create mode 100644 board/sunxi/dram_a13_oli_micro.c
create mode 100644 board/sunxi/dram_r7dongle.c
create mode 100644 include/configs/sun5i.h
Even if there is a valid reason to bundle the addition of some example
sun5i based board to boards.cfg
To address this first, I believe that it is a good idea when adding
functionality to also enable it, otherwise one is just adding dead code.
with the changes needed for sun5i SoC
variant, why is it *two* boards this time?
Because there are 2 sun5i variants A13 and A10s
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
