Hi Fabio, On Tue, 1 Jul 2014 10:53:57 -0300, Fabio Estevam <feste...@gmail.com> wrote:
> Hi Helmut, > > On Tue, Jul 1, 2014 at 10:33 AM, Helmut Raiger <helmut.rai...@hale.at> wrote: > > Hi, > > > > the commit 41623c91 breaks the SPL on i.mx31 platforms. > > The original startup code (start.S) was position independent to > > allow relocation in board_init_f. This is necessary as the internal > > RAM used by the IPL to load the first 2kB from NAND is also > > used by the NAND controller to buffer pages. As far as the issue goes: where and how exactly is the code not position independent now? > > Does changing the startup code back to PIC generate any > > drawbacks on other ARM platforms? How would this changing back to PIC be implemented? Not by reverting the patch, I hope. > > What was the intention of the change besides unifying? Any other intent would be stated in the commit message. > > Could someone verify the issue on a i.mx31 platform. > > Magnus also reported the same issue to me recently. > > I don't have access to a mx31 board at the moment to investigate this bug. > > Maybe Albert, Stefano or Magnus could help? I don't have mx31 hardware either. > Thanks, > > Fabio Estevam Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
