Hi Wolfgang, On Friday 15 May 2009 17:32:17 Wolfgang Denk wrote: > > Currently the mtdparts commands are included in the jffs2 command > > support. This doesn't make sense anymore since other commands (e.g. UBI) > > use this infrastructure as well now. This patch separates the mtdparts > > commands from the jffs2 commands making it possible to only select > > mtdparts when no JFFS2 support is needed. > > > > Signed-off-by: Stefan Roese <s...@denx.de> > > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > > As it turns out, that split was incomplete or incorrect. > > It seems that since commit 68d7d65100 we have two different, > incompatible implementations of mtdparts_init() - one in > common/cmd_jffs2.c and another one in common/cmd_mtdparts.c > > When NAND and JFFS2 and MTDPARTS are enabled at the same time, the > mtdparts_init() from common/cmd_mtdparts.c is called, which obviously > does not pereform the required intializations for JFFS2: all JFFS2 > related commands just return without any error messages but also > without any useful output either.
Sorry about this. > Please provide a fix! OK, I'll try to come up with a patch quickly. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
