* Rafal Jaworowski | 2009-05-15 20:12:48 [+0200]: > I can confirm this. We have been suffering from instabilities of the main > line U-Boot on MPC8572DS since a long time ago. It is strongly correlated > with memory controller settings: the same h/w unit works fine with > 1.3.0-rc2 (Freescale LTIB), while using anything newer from main line leads > to hangs and/or corruptions. We tried to nail down the issue, but could not > find anything conclusive in the given time, so just stick with that old > (but stable) 1.3.0 derivative... With the v1.3.0-rc2 I was able to compile qt4-x11 (one make job) with no problems. After I tried to compile the package six times in parallel (also one make job) I saw that some of the compile jobs ended up in an ICE at random points. So I thing there is also some instability with v1.3.0-rc2 but it is harder to trigger.
> Other data point: we observed much often the above problems with rev1.1 of > the silicon, rev1.0 is also failing, but 1.1 is very quick to err. I have just rev1.1 > > Rafal > Sebastian _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
