Hi Fabio, On 06/06/2014 00:31, Fabio Estevam wrote: > From: Fabio Estevam <fabio.este...@freescale.com> > > mx6 reference manual incorrectly states that the DEVICE_TYPE field of > IOMUXC_GPR12 register should be configured as '0010' for setting the PCI > controller in RC mode. The correct value should be '0100' instead. > > This also aligns with the same value used in the mx6 pci kernel driver. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > --- > arch/arm/include/asm/arch-mx6/iomux.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/include/asm/arch-mx6/iomux.h > b/arch/arm/include/asm/arch-mx6/iomux.h > index f9ee0d9..6a4a632 100644 > --- a/arch/arm/include/asm/arch-mx6/iomux.h > +++ b/arch/arm/include/asm/arch-mx6/iomux.h > @@ -39,7 +39,7 @@ > #define IOMUXC_GPR12_LOS_LEVEL_MASK (0x1f << 4) > #define IOMUXC_GPR12_APPS_LTSSM_ENABLE (1 << 10) > #define IOMUXC_GPR12_DEVICE_TYPE_EP (0x0 << 12) > -#define IOMUXC_GPR12_DEVICE_TYPE_RC (0x2 << 12) > +#define IOMUXC_GPR12_DEVICE_TYPE_RC (0x4 << 12) > #define IOMUXC_GPR12_DEVICE_TYPE_MASK (0xf << 12) >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
