From: Markus Niebel <markus.nie...@tqs.de>
add support for USB and USB storage on the USB ports
on the MBA6 baseboard for TQMa6 moduels
Signed-off-by: Markus Niebel <markus.nie...@tq-group.com>
---
board/tqc/tqma6/tqma6_mba6.c | 7 +++++++
include/configs/tqma6.h | 11 +++++++++++
2 files changed, 18 insertions(+)
diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c
index 94df68f..4082e05 100644
--- a/board/tqc/tqma6/tqma6_mba6.c
+++ b/board/tqc/tqma6/tqma6_mba6.c
@@ -293,6 +293,13 @@ int board_eth_init(bd_t *bis)
return 0;
}
+#ifdef CONFIG_USB_EHCI_MX6
+int board_ehci_hcd_init(int port)
+{
+ return 0;
+}
+#endif
+
int tqma6_bb_board_early_init_f(void)
{
mba6_setup_iomuxc_uart();
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index d2b12c3..115f45a 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -71,6 +71,17 @@
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
/* Fuses */
#define CONFIG_MXC_OCOTP
#define CONFIG_CMD_FUSE
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
