The u-boot Overo board actually supports both Overo (OMAP35xx)
and Overo Storm (AM/DM37xx) COMs with a range of different expansion
boards. This provides a mechanism to select the an appropriate device
tree file based on the processor version and, if available, the
expansion board ID written on the expansion board EEPROM. To match the
3.15+ kernels, fdtfile names have this format:
"omap3-overo[-storm]-<expansion board name>.dtb"
By default, we use "omap3-overo-storm-tobi.dtb".
Signed-off-by: Ash Charles <ashchar...@gmail.com>
Conflicts:
include/configs/omap3_overo.h
---
board/overo/overo.c | 48 +++++++++++++++++++++++++++++++++++++++++++
include/configs/omap3_overo.h | 2 +-
2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 62b50a8..6a0a655 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -230,6 +230,52 @@ unsigned int get_expansion_id(void)
return expansion_config.device_vendor;
}
+#ifdef CONFIG_OF_LIBFDT
+void set_fdt(void)
+{
+ int is_storm = 0;
+ char fdtname[64];
+ char expansion_name[32];
+
+ if (get_cpu_family() != CPU_OMAP34XX)
+ is_storm = 1;
+
+ switch (expansion_config.device_vendor) {
+ case GUMSTIX_SUMMIT:
+ snprintf(expansion_name, ARRAY_SIZE(expansion_name), "%s",
+ "summit");
+ break;
+ case GUMSTIX_CHESTNUT43:
+ snprintf(expansion_name, ARRAY_SIZE(expansion_name), "%s",
+ "chestnut43");
+ break;
+ case GUMSTIX_PALO43:
+ snprintf(expansion_name, ARRAY_SIZE(expansion_name), "%s",
+ "palo43");
+ break;
+ case GUMSTIX_GALLOP43:
+ snprintf(expansion_name, ARRAY_SIZE(expansion_name), "%s",
+ "gallop43");
+ break;
+ case GUMSTIX_ALTO35:
+ snprintf(expansion_name, ARRAY_SIZE(expansion_name), "%s",
+ "alto35");
+ break;
+ case GUMSTIX_TOBI:
+ case GUMSTIX_NO_EEPROM:
+ default:
+ snprintf(expansion_name, ARRAY_SIZE(expansion_name), "%s",
+ "tobi");
+ }
+
+ snprintf(fdtname, ARRAY_SIZE(fdtname), "omap3-overo%s-%s.dtb",
+ is_storm ? "-storm" : "", expansion_name);
+ setenv("fdtfile", fdtname);
+}
+#else
+void set_fdt(void) { return; }
+#endif
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
@@ -360,6 +406,8 @@ int misc_init_r(void)
dieid_num_r();
+ set_fdt();
+
return 0;
}
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 7b97be9..f79a528 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -83,7 +83,7 @@
/* Environment information */
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
- "fdtfile=overo.dtb\0" \
+ "fdtfile=omap3-overo-storm-tobi.dtb\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
