Hi, Thanks for the help. I am able to boot the kernel on foundation models but unable to boot the kernel on the FVP base models. The model itself seem to hang while booting the kernel. Here is the log: http://pastebin.com/HajuPFZ1
I am investigating on what the last instruction getting executed in the kernel. In the meantime I wanted to know if people are able to boot the kernel with the same u-boot binary on FVP Base models. The model version that I am using is given below: /usr/local/FVP_Base_AEMv8A-AEMv8A/models/Linux64_GCC-4.1/FVP_Base_AEMv8A-AEMv8A --version Fast Models [0.8.5502 (Mar 17 2014)] Copyright 2000-2014 ARM Limited. All Rights Reserved. Top component name: FVP_Base_AEMv8A_AEMv8A Regards, Vishal On 29 May 2014 18:30, feng...@phytium.com.cn <feng...@phytium.com.cn> wrote: > > hi Tiger, > > > Hi, fenghua: > > Followed your steps, I also downloaded linux-3.14.4.tar.xz . > > And run it with ATF + Uboot. > > It could boot into linux kernel, and hangs at mounting root fs. > > > > Thanks a lot! > > I did not test rootfs. It depends on where you place the rootfs(ramdisk or > mmc etc). > The kernel should be reconfigured to support corresponding device. > > Best wishes, > David > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot