Hi,
Am 26.05.2014 13:28, schrieb Masahiro Yamada:
Hi Vasili,
On Mon, 26 May 2014 13:51:52 +0300
Vasili Galka <vvv...@gmail.com> wrote:
Hi,
Are all boards supposed to build fine in v2014.04 release?
I'm running "./MAKEALL -a powerpc" and get build failure for 9 boards:
Boards with errors: 9 ( ep8248 MPC8572DS MPC8572DS_36BIT PMC440
dlvision-10g io iocon neo ep8248 )
[...]
dlvision-10g
------------
powerpc-none-eabi-ld.bfd: section .resetvec loaded at
[00000000fffffffc,00000000ffffffff] overlaps section .data loaded at
[00000000ffffdf18,000000010000047b]
powerpc-none-eabi-ld.bfd: u-boot: section .resetvec lma 0xfffffffc
adjusted
to 0x10000047c
powerpc-none-eabi-ld.bfd: u-boot: section .u_boot_list lma 0x10000047c
adjusted to 0x100000480
make[1]: *** [u-boot] Error 1
make: *** [sub-make] Error 2
io
--
powerpc-none-eabi-ld.bfd: section .resetvec loaded at
[00000000fffffffc,00000000ffffffff] overlaps section .u_boot_list
loaded at
[00000000fffffa4c,000000010000024f]
powerpc-none-eabi-ld.bfd: u-boot: section .resetvec lma 0xfffffffc
adjusted
to 0x100000250
make[1]: *** [u-boot] Error 1
make: *** [sub-make] Error 2
iocon
-----
powerpc-none-eabi-ld.bfd: section .resetvec loaded at
[00000000fffffffc,00000000ffffffff] overlaps section .data loaded at
[00000000ffffef24,00000001000016db]
powerpc-none-eabi-ld.bfd: u-boot: section .resetvec lma 0xfffffffc
adjusted
to 0x1000016dc
powerpc-none-eabi-ld.bfd: u-boot: section .u_boot_list lma 0x1000016dc
adjusted to 0x1000016e0
make[1]: *** [u-boot] Error 1
make: *** [sub-make] Error 2
neo
---
powerpc-none-eabi-ld.bfd: section .resetvec loaded at
[00000000fffffffc,00000000ffffffff] overlaps section .u_boot_list
loaded at
[00000000fffff974,0000000100000193]
powerpc-none-eabi-ld.bfd: u-boot: section .resetvec lma 0xfffffffc
adjusted
to 0x100000194
make[1]: *** [u-boot] Error 1
make: *** [sub-make] Error 2
I reported these broken boards a month ago.
See
http://lists.denx.de/pipermail/u-boot/2014-April/177928.html
http://lists.denx.de/pipermail/u-boot/2014-April/178183.html
But nobody has taken an action about it.
Oh well, someone has...
Dirk Eibach posted a patch for the broken gdsys boards (dlvision10, io,
iocon and neo).
See: http://patchwork.ozlabs.org/patch/344162/
Greetings,
Reinhard Pfau.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
