Sorry, my previous post was not shown correctly. The raw text was missing. I removed the annotation.
Since this commit my Ethernet Gadget on a custom Freescale i.MX28 board is broken. Using tftp to download files I get in almost all cases a timeout: This is one case: Updating rootfs ... using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ###########timeout sending packets to usb ethernet This is another one: Updating Boot Firmware ... using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() I reverted this commit from my master branch it works again as expected. -- View this message in context: http://u-boot.10912.n7.nabble.com/PATCH-1-2-usb-ci-udc-allow-multiple-buffer-allocs-per-ep-tp179430p181251.html Sent from the U-Boot mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
