Dear Andreas Bießmann, Andreas Bießmann <andreas.de...@googlemail.com> writes: >For sama5d3xek we need to modify the SPL image for correct detection by ROM >code. > >Signed-off-by: Andreas Bießmann <andreas.de...@googlemail.com> >Tested-by: Bo Shen <voice.s...@atmel.com> > >--- >Changes in v3: >* add atmel_pmecc_params host tool, it generates an appropriate string for > mkimage -n switch with compiled in values also used in atmel_nand driver > >Changes in v2: >* add -n switch to mkimage for PMECC type NAND and CONFIG_SYS_NANDFLASH > > arch/arm/cpu/armv7/at91/config.mk | 10 ++++++++ > doc/README.atmel_pmecc | 21 +++++++++++++++ > spl/Makefile | 11 ++++++++ > tools/Makefile | 2 ++ > tools/atmel_pmecc_params.c | 51 +++++++++++++++++++++++++++++++++++++ > 5 files changed, 95 insertions(+) > create mode 100644 arch/arm/cpu/armv7/at91/config.mk > create mode 100644 tools/atmel_pmecc_params.c
applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
