On 5/26/2014 Monday 6:56 PM, Marek Vasut wrote:
On Monday, May 26, 2014 at 12:28:49 PM, aking_jin wrote:
Hi, Marek

On 2014/5/26 Mon 16:59, Marek Vasut wrote:
On Monday, May 26, 2014 at 09:51:58 AM, aking_jin wrote:
Hi, marek

       I've seen on the Internet that pxa310 support SDHC up to 32GB, but

I'm using u-boot 2014.01, It could initialize OK.

       Device: PXA MMC
       Manufacturer ID: 3
       OEM: 5344
       Name: SS08G
       Tran Speed: 26000000
       Rd Block Len: 512
       SD version 3.0
       High Capacity: Yes
       Capacity: 7.4 GiB
       Bus Width: 4-bit
It shows time out while reading block . Is there any particular

process should be add?
It is well possible that the driver is broken on PXA3xx . Note that
mainline U- Boot doesn't really support PXA3xx . Are you working on
PXA3xx support for mainline U-Boot ?
I'm looking for support for pxa310 MMC SDHC .
In the PXA310 SPEC:

      The MMC module is based on the standards outlined in the
MultiMediaCard System
Specification Version 3.3.1. The SD module manages one SD or SDIO card
based on the standards
outlined in the SD Memory Card Specification Version 1.10 and SDIO Card
Specification Version
1.0

I'm doubting if the controller support SDHC (SD 2.0) ?
The PXA27x controller works even with SDXC , that is tested. I suspect there
might be some change in the PXA3xx controller, but I don't really know for sure.
You'd have to check.
Thank you for your answer. are you using SD mode or SPI Mode? which version are you using?
Also, you didn't really answer my question with regards to porting U-Boot above.
If you do that, use latest mainline, not 2014.01 .
I just have to add SD support for my board, It's emergency.  sorry for that.

Best regards,
Marek Vasut


--
Best Regards
aking_jin


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to