On Sat, May 24, 2014 at 11:32:00AM +0200, Albert ARIBAUD wrote: > Hello Tom (and sorry for the duplicate), > > The following changes since commit > 10dc77716f41979e03baf3b847b97dc7279ef30d: > > esdhc/usdhc: Fix warning when CONFIG_SYS_FSL_ESDHC_USE_PIO is not set > (2014-05-23 09:19:05 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-arm master > > for you to fetch changes up to 33144ea443c298ac9d6f04926a02881a5bae91a3: > > Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-05-24 > 09:50:00 +0200) > > ---------------------------------------------------------------- > > Albert ARIBAUD (3): > Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master' > Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master' > Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' > > Ash Charles (9): > omap: overo: allow the use of a plain text env file instead boot > scripts OMAP3: overo: add command support for mtd and ubi > OMAP3: overo: eliminate hard-coded partition offsets > arm: omap3: Fix omap3_overo SPL boot hangup > Add Board Revision for Wireless chip > OMAP3: overo: add some Gumstix expansion boards > Allow overo to boot with device tree > omap3: overo: Use common configurations for Overo > omap4: duovero: Add Gumstix DuoVero machine. > > Dmitry Lifshitz (3): > cm-t54: add cm-t54 board support > cm-t54: add EEPROM support and MAC address handling > cm-t54: add environment partition runtime detection > > Heiko Schocher (1): > arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boards > > Igor Grinberg (1): > compulab: eeprom: add default eeprom address > > Ilya Ledvich (1): > compulab: eeprom: enable any i2c driver > > Keerthy (1): > ARM: DRA72x: volt: Update the pmic offsets > > Lokesh Vutla (5): > ARM: DRA72x: Add Silicon ID support > ARM: DRA72x: clocks: Update the hwdata > ARM: DRA72x: Update EMIF data > ARM: DRA7xx: ctrl: Fix efuse register addresses > ARM: OMAP: Fix omap_sdram_size calculation > > Masahiro Yamada (7): > zynq: add empty xil_io.h to avoid compile error > zynq: treat ps7_init.c/h as external files to ignore them > build: support a new image u-boot-dtb.img > zynq: load u-boot-dtb.img if CONFIG_OF_SEPARATE is defined > zynq: import zynq-7000.dtsi from Linux Kernel > zynq: add memory nodes to device tree to initialize DRAM with OF > zynq: add UART nodes to device tree to initialize UART with OF > > Michal Simek (12): > ARM: zynq: Fix sparse warnings in slcr.c > ARM: zynq: Fix sparse warning in ddrc.c > ARM: zynq: Remove sparse warnings > ARM: zynq: Do not use half memory size for ECC case > ARM: zynq: Call zynq board_init() in SPL > ARM: zynq: slcr: Fix incorrect commentary > ARM: zynq: Setup correct slcr_lock value > ARM: zynq: Fix building SPL without FPGA support > ARM: zynq: Extend kernel image size to 60MB > ARM: zynq: Add MIO detection code > ARM: zynq: ehci: Added USB host driver support > ARM: zynq: Extend maximum number of command arguments > > Mike Looijmans (1): > ARM: zynq: Fix bootmode mask > > Nobuhiro Iwamatsu (20): > arm: rmobile: Add define of SCIF register for R8A7790 and R8A7791 > arm: rmobile: koelsch: Remove define of SCIF register > arm: rmobile: koelsch: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY > arm: rmobile: koelsch: Enable optimization of thumb > arm: rmobile: lager: Remove define of SCIF register > arm: rmobile: lager: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY > arm: rmobile: lager: Enable optimization of thumb > gpio: r8a7791-gpio: Fix typo in macro > gpio: r8a7790-gpio: Fix typo in macro > arm: rmobile: koelsch: Add support USB controller > arm: rmobile: koelsch: Add support command and filesystems of VFAT > arm: rmobile: lager: Add support USB controller > arm: rmobile: lager: Add support command and filesystems of VFAT > arm: rmobile: lager: Add support ext4/fat write command > arm: rmobile: koelsch: Add support ext4/fat write command > arm: rmobile: r8a7791: Fix MOD_SEL3 function table about > FN_SEL_IEB arm: rmobile: koelsch: Fix QoS revision 0.240 and 0.320 > arm: rmobile: armadillo800eva: Enable CONFIG_SYS_GENERIC_BOARD > arm: rmobile: koelsch: Enable CONFIG_SYS_GENERIC_BOARD > arm: rmobile: lager: Enable CONFIG_SYS_GENERIC_BOARD > > Peter A. Bigot (1): > OMAP3: overo: increase linux partition to 8 MiB > > Sergey Alyoshin (1): > am33xx: report silicon revision instead of code > > Siva Durga Prasad Paladugu (5): > ARM: zynq: Added efuse status register base address > ARM: zynq: Added USB host support for zynq boards > ARM: zynq: Enable the FAT write capability > ARM: zynq: Move USB/SD/MMC common FAT configs > ARM: zynq: Enable EXT4 configs > > Tom Rini (1): > armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate > omap_hw_init_context > > pekon gupta (3): > ARM: omap4: add platform specific info for GPMC and ELM > controllers ARM: omap5: add platform specific info for GPMC and ELM > controllers ARM: omap: merge GPMC initialization code for all platform > > Makefile | 8 ++++ > arch/arm/cpu/armv7/am33xx/Makefile | 1 - > arch/arm/cpu/armv7/am33xx/mem.c | 98 > --------------------------------------- > arch/arm/cpu/armv7/am33xx/sys_info.c | 41 > +++++++++------- arch/arm/cpu/armv7/omap-common/Makefile | > 4 -- arch/arm/cpu/armv7/omap-common/emif-common.c | 6 ++- > arch/arm/cpu/armv7/omap-common/hwinit-common.c | 15 +++--- > arch/arm/cpu/armv7/omap-common/mem-common.c | 117 > +++++++++++++++++++++++++++++++++++++++++++--- > arch/arm/cpu/armv7/omap3/Makefile | 1 - > arch/arm/cpu/armv7/omap5/hw_data.c | 40 > ++++++++++++++++ arch/arm/cpu/armv7/omap5/hwinit.c | > 3 ++ arch/arm/cpu/armv7/omap5/prcm-regs.c | 8 ++-- > arch/arm/cpu/armv7/omap5/sdram.c | 19 +++++++- > arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c | 2 +- > arch/arm/cpu/armv7/zynq/cpu.c | 13 ++++++ > arch/arm/cpu/armv7/zynq/ddrc.c | 5 +- > arch/arm/cpu/armv7/zynq/slcr.c | 87 > ++++++++++++++++++++++++++++++++-- > arch/arm/cpu/armv7/zynq/spl.c | 15 ++++++ > arch/arm/dts/zynq-7000.dtsi | 194 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > arch/arm/dts/zynq-microzed.dts | 9 ++++ > arch/arm/dts/zynq-zc702.dts | 9 ++++ > arch/arm/dts/zynq-zc706.dts | 9 ++++ > arch/arm/dts/zynq-zc770-xm010.dts | 9 ++++ > arch/arm/dts/zynq-zc770-xm012.dts | 9 ++++ > arch/arm/dts/zynq-zc770-xm013.dts | 9 ++++ > arch/arm/dts/zynq-zed.dts | 9 ++++ > arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 + > arch/arm/include/asm/arch-omap3/mem.h | 1 + > arch/arm/include/asm/arch-omap4/cpu.h | 5 +- > arch/arm/include/asm/arch-omap4/hardware.h | 26 +++++++++++ > arch/arm/include/asm/arch-omap4/mem.h | 62 > +++++++++++++++++++++++++ > arch/arm/include/asm/arch-omap4/omap.h | 3 -- > arch/arm/include/asm/arch-omap4/sys_proto.h | 51 > +------------------- arch/arm/include/asm/arch-omap5/cpu.h > | 5 +- arch/arm/include/asm/arch-omap5/hardware.h | 26 > +++++++++++ arch/arm/include/asm/arch-omap5/mem.h | 62 > +++++++++++++++++++++++++ > arch/arm/include/asm/arch-omap5/omap.h | 9 +--- > arch/arm/include/asm/arch-omap5/sys_proto.h | 50 > +------------------- arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h > | 6 +-- arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h | 6 +-- > arch/arm/include/asm/arch-rmobile/r8a7791.h | 1 + > arch/arm/include/asm/arch-rmobile/rcar-base.h | 8 ++++ > arch/arm/include/asm/arch-zynq/hardware.h | 13 +++++- > arch/arm/include/asm/arch-zynq/sys_proto.h | 2 + > arch/arm/include/asm/omap_common.h | 7 +-- > arch/arm/include/asm/ti-common/sys_proto.h | 72 > ++++++++++++++++++++++++++++ > board/compulab/cm_t54/Makefile | 10 ++++ > board/compulab/cm_t54/cm_t54.c | 262 > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > board/compulab/cm_t54/mux.c | 94 > +++++++++++++++++++++++++++++++++++++ > board/compulab/cm_t54/spl.c | 66 > ++++++++++++++++++++++++++ > board/compulab/common/Makefile | 2 +- > board/compulab/common/eeprom.c | 5 ++ > board/compulab/common/eeprom.h | 2 +- > board/gumstix/duovero/Makefile | 8 ++++ > board/gumstix/duovero/duovero.c | 264 > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > board/gumstix/duovero/duovero_mux_data.h | 199 > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > board/overo/overo.c | 43 > ++++++++++++++++- board/overo/overo.h | > 17 +++++++ board/renesas/koelsch/qos.c | 1 + > board/xilinx/zynq/.gitignore | 1 + > board/xilinx/zynq/Makefile | 5 +- > board/xilinx/zynq/board.c | 25 ++++++---- > board/xilinx/zynq/ps7_init.c | 12 ----- > board/xilinx/zynq/xil_io.h | 13 ++++++ > boards.cfg | 2 + > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-zynq.c | 104 > +++++++++++++++++++++++++++++++++++++++++ > include/configs/armadillo-800eva.h | 1 + > include/configs/cm_t54.h | 149 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > include/configs/duovero.h | 62 > +++++++++++++++++++++++++ > include/configs/koelsch.h | 23 +++++++-- > include/configs/lager.h | 22 +++++++-- > include/configs/omap3_overo.h | 296 > > +++++++++++++++++++++++++++++++++++++------------------------------------------------------------------------------- > include/configs/siemens-am33x-common.h | 2 + > include/configs/ti_omap4_common.h | 9 ++++ > include/configs/zynq-common.h | 52 > ++++++++++++++++----- include/configs/zynq_zc70x.h > | 1 + include/configs/zynq_zed.h | 1 + 78 > files changed, 2383 insertions(+), 527 deletions(-) delete mode 100644 > arch/arm/cpu/armv7/am33xx/mem.c create mode 100644 > arch/arm/include/asm/arch-omap4/hardware.h create mode 100644 > arch/arm/include/asm/arch-omap4/mem.h create mode 100644 > arch/arm/include/asm/arch-omap5/hardware.h create mode 100644 > arch/arm/include/asm/arch-omap5/mem.h create mode 100644 > arch/arm/include/asm/ti-common/sys_proto.h create mode 100644 > board/compulab/cm_t54/Makefile create mode 100644 > board/compulab/cm_t54/cm_t54.c create mode 100644 > board/compulab/cm_t54/mux.c create mode 100644 > board/compulab/cm_t54/spl.c create mode 100644 > board/gumstix/duovero/Makefile create mode 100644 > board/gumstix/duovero/duovero.c create mode 100644 > board/gumstix/duovero/duovero_mux_data.h create mode 100644 > board/xilinx/zynq/.gitignore delete mode 100644 > board/xilinx/zynq/ps7_init.c create mode 100644 > board/xilinx/zynq/xil_io.h create mode 100644 > drivers/usb/host/ehci-zynq.c create mode 100644 > include/configs/cm_t54.h create mode 100644 include/configs/duovero.h
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot