Hi Harsha, On 21 May 2014 06:46, Harsha Kiran <harshakiran...@gmail.com> wrote: > Hi Simon, > > I have added the next patch in the series i.e., (....../339610/) But the > result is still the same. This particular patch just created a device tree > In the arch/arm/dts folder For the beaglebone. I have already tried creating > for am335x-evmsk and was able to build the u-boot-dtb.bin. > > I have noticed that MLO is configured to read only the u-boot.img not any > other binaries (eg U-boot.bin or u-boot-dtb.bin). > It gives me the following error.. > spl_load_image_fat: error reading image u-boot.img, err - -1 Which part of > the configuration I should change so that MLO tries to read the > u-boot-dtb.bin as the third stage bootloader?? > I tried loading MLO->u-boot.img first, but this time it reads the u-boot.img > but gives the following error.. > > reading u-boot.img > reading u-boot.img > No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin > or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb> ### ERROR ### > Please RESET the board ### > > I tried applying the next patch in the series to add that extra padding to > the image size (ie., .......org/patch/339611) But could not successfully > apply the patch.. > harsha@harshakiran_kasha:/abb/Experiments/u-boot$ sudo patch -p1 -R < > patch3.patch patching file tools/fit_image.c Hunk #1 FAILED at 35. > Hunk #2 FAILED at 60. > Hunk #3 succeeded at 38 (offset -137 lines). > Hunk #4 FAILED at 210. > Hunk #5 succeeded at 115 (offset -123 lines). > 3 out of 5 hunks FAILED -- saving rejects to file tools/fit_image.c.rej > patching file tools/image-host.c
You will need to resolve these problems and manually apply the patch. Probably you don't need sudo. > > and then the compilation gave the following errors.. > harsha@harshakiran_kasha:/abb/Experiments/u-boot$ sudo make ARCH=arm > CROSS_COMPILE=/abb/compilers/gcc-linaro-arm-linux-gnueabihf-4.7-2013.04-20130415_linux/bin/arm-linux-gnueabihf- > -j8 DEV_TREE_BIN=./am335x-boneblack.dtb > CHK include/config/uboot.release > CHK include/generated/timestamp_autogenerated.h > UPD include/generated/timestamp_autogenerated.h > CHK include/generated/version_autogenerated.h > HOSTCC tools/dumpimage.o > HOSTCC tools/fit_image.o > HOSTCC tools/image-host.o > HOSTCC tools/mkenvimage.o > HOSTCC tools/mkimage.o > tools/fit_image.c: In function ‘fit_handle_file’: > tools/fit_image.c:74:3: error: ‘destfd’ undeclared (first use in this > function) destfd = mmap_fdt(params->cmdname, params->keydest, > tools/fit_image.c:74:3: note: each undeclared identifier is reported only > once for each function it appears in > tools/fit_image.c:75:8: error: ‘dest_blob’ undeclared (first use in this > function) &dest_blob, &sbuf, 1); > ^ > tools/fit_image.c:75:20: error: ‘sbuf’ undeclared (first use in this > function) > &dest_blob, &sbuf, 1); > ^ > tools/fit_image.c:78:3: error: ‘destfd_size’ undeclared (first use in this > function) > destfd_size = sbuf.st_size; > ^ > tools/fit_image.c:81:2: error: ‘tfd’ undeclared (first use in this function) > tfd = mmap_fdt(params->cmdname, tmpfile, &ptr, &sbuf, 1); > ^ > tools/fit_image.c:81:44: error: ‘ptr’ undeclared (first use in this > function) > tfd = mmap_fdt(params->cmdname, tmpfile, &ptr, &sbuf, 1); > ^ > tools/fit_image.c:98:3: error: label ‘err_add_timestamp’ used but not > defined > goto err_add_timestamp; > ^ > tools/fit_image.c:91:3: error: label ‘err_add_hashes’ used but not defined > goto err_add_hashes; > ^ > tools/fit_image.c:83:3: error: label ‘err_mmap’ used but not defined > goto err_mmap; > ^ > tools/fit_image.c:77:4: error: label ‘err_keydest’ used but not defined > goto err_keydest; > ^ > tools/fit_image.c:42:6: warning: unused variable ‘ret’ [-Wunused-variable] > int ret; > ^ > tools/fit_image.c:41:9: warning: unused variable ‘size_inc’ > [-Wunused-variable] > size_t size_inc; > ^ > make[1]: *** [tools/fit_image.o] Error 1 > make[1]: *** Waiting for unfinished jobs.... > make: *** [tools] Error 2 > > Sorry for deleting the previous messages. U-boot mailing list is rejecting > my emails If I include them The objective is to get u-boot-dtb.bin packed into the .img file. I had this booting fine, but it was some weeks ago. I will give it another go when I get back from my trip next week. Regards. Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
