Zynq boards define CONFIG_OF_CONTROL and CONFIG_OF_SEPARATE, but it is not working.
One possible workaround was to edit include/configs/zynq-common.h to disable CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DISPLAY_BOARDINFO_LATE CONFIG_FIT_SIGNATURE CONFIG_RSA I am not satisfied with this temporal workaround. My motivation is to run U-boot mainline on Zynq boards with OF control. To achieve this, SPL must load u-boot-dtb.bin. 1/5 adds support u-boot-dtb.img (= uImage header + u-boot-dtb.bin) 2/5 switches to load u-boot-dtb.img. 3/5 thru 5/5 add missing some nodes to device tree. This series was tested on my ZC706 board. Changes in v2: - Select either "u-boot-dtb.img" or "u-boot.img" for CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. - Import zynq-7000.dtsi from Linux Kernel v3.15-rc5 Masahiro Yamada (5): build: support a new image u-boot-dtb.img zynq: load u-boot-dtb.img if CONFIG_OF_SEPARATE is defined zynq: import zynq-7000.dtsi from Linux Kernel zynq: add memory nodes to device tree to initialize DRAM with OF zynq: add UART nodes to device tree to initialize UART with OF Makefile | 8 ++ arch/arm/dts/zynq-7000.dtsi | 194 ++++++++++++++++++++++++++++++++++++++ arch/arm/dts/zynq-microzed.dts | 9 ++ arch/arm/dts/zynq-zc702.dts | 9 ++ arch/arm/dts/zynq-zc706.dts | 9 ++ arch/arm/dts/zynq-zc770-xm010.dts | 9 ++ arch/arm/dts/zynq-zc770-xm012.dts | 9 ++ arch/arm/dts/zynq-zc770-xm013.dts | 9 ++ arch/arm/dts/zynq-zed.dts | 9 ++ include/configs/zynq-common.h | 20 ++-- 10 files changed, 277 insertions(+), 8 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
