On Mon, May 5, 2014 at 10:26 AM, Tom Rini <tr...@ti.com> wrote:
> - Drop DEBUG
> - Drop defines we can use the default of.
> - Drop CONFIG_GICV3 and related defines, we aren't using interrupts and
> do not need to configure the interrupt controller.
> - Provide a larger malloc pool.
> - Correct default locations for kernel / initrd / device tree
>
> Signed-off-by: Tom Rini <tr...@ti.com>
> ---
[...]
> -#define CONFIG_GICV3
> -
> /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
>
> /*#define CONFIG_SYS_GENERIC_BOARD*/
> @@ -94,20 +90,11 @@
> /* Generic Timer Definitions */
> #define COUNTER_FREQUENCY (0x1800000) /* 24MHz */
>
> -/* Generic Interrupt Controller Definitions */
> -#ifdef CONFIG_GICV3
> -#define GICD_BASE (0x2f000000)
> -#define GICR_BASE (0x2f100000)
> -#else
> -#define GICD_BASE (0x2C001000)
> -#define GICC_BASE (0x2C002000)
> -#endif
IIRC, these should be needed if secure to non-secure switching is done.
> #define CONFIG_SYS_MEMTEST_START V2M_BASE
> #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
>
> /* Size of malloc() pool */
> -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
This seems like another candidate for some sane default value.
> /* SMSC91C111 Ethernet Configuration */
> #define CONFIG_SMC91111 1
> @@ -121,7 +108,6 @@
> #define CONFIG_CONS_INDEX 0
>
> #define CONFIG_BAUDRATE 115200
> -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
> #define CONFIG_SYS_SERIAL0 V2M_UART0
> #define CONFIG_SYS_SERIAL1 V2M_UART1
>
> @@ -166,10 +152,9 @@
>
> /* Initial environment variables */
> #define CONFIG_EXTRA_ENV_SETTINGS \
> - "kernel_addr=0x200000\0" \
> - "initrd_addr=0xa00000\0" \
> - "initrd_size=0x2000000\0" \
> - "fdt_addr=0x100000\0" \
> + "kernel_addr=0x80080000\0" \
> + "initrd_addr=0x90000000\0" \
> + "fdt_addr=0x88000000\0" \
Don't we want the _r variants here?
Rob
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
