On 04/30/2014 08:01 AM, Valentin Longchamp wrote: > Things have stabilized quite a lot on the u-boot front for the Keymile > kmp204x/kmcoge4 board. There are a few remaining patches that should get > merged to have a complete support of the architecture/board in u-boot. > These include: > - support for some additional functions of the QRIO board reset/control > CPLD (LEDs, Factory Test signal) > - better reset sequence according to the tests/problems noticed during > the development > - an update to the RCW (some external interrupts are unused and set as > GPIOs now) > - an additionnal workaround in the PBL file (with an implementation > enhancement for a previous one). > > > Stefan Bigler (2): > kmp204x: Add support for the unit LEDs > kmp204x: handle dip-switch for factory settings > > Valentin Longchamp (6): > kmp204x: selftest/factory test pin support > kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines > kmp204x: complete the reset sequence and PRST configuration > kmp204x: update the RCW > kmp204x: add workaround for A-004849 > kmp204x: enable the errata command > > board/keymile/kmp204x/kmp204x.c | 75 > ++++++++++++++++++++++++++++++----- > board/keymile/kmp204x/kmp204x.h | 3 ++ > board/keymile/kmp204x/pbi.cfg | 43 +++++++++++++++++--- > board/keymile/kmp204x/pci.c | 17 ++++---- > board/keymile/kmp204x/qrio.c | 29 +++++++++++++- > board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +- > include/configs/km/kmp204x-common.h | 17 ++++---- > 7 files changed, 151 insertions(+), 35 deletions(-) >
Applied to u-boot-mpc85xx/master. Thanks, York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
