On 21:31 Sun 10 May , Magnus Lilja wrote: > 2009/5/9 Jean-Christophe PLAGNIOL-VILLARD <plagn...@jcrosoft.com>: > > On 21:56 Sun 03 May , Magnus Lilja wrote: > >> @@ -32,7 +35,7 @@ > >> #include <version.h> > >> .globl _start > >> _start: b reset > >> -#ifdef CONFIG_ONENAND_IPL > >> +#if defined(CONFIG_ONENAND_IPL) || defined(CONFIG_NAND_SPL) > > create a better CONFIG_ > > because we could need for other boot mode > > A better CONFIG_ than what? CONFIG_NAND_SPL is already used elsewhere > in U-boot when booting from NAND. IIRC in this case the purpose is to reduce the size of the start.S to allow more code in the ipl & spl > > >> ldr pc, _hang > >> ldr pc, _hang > >> ldr pc, _hang > >> @@ -156,9 +159,9 @@ relocate: /* relocate U-Boot > >> to RAM */ > >> adr r0, _start /* r0 <- current position of code > >> */ > >> ldr r1, _TEXT_BASE /* test if we run from flash or RAM > >> */ > >> cmp r0, r1 /* don't reloc during debug > >> */ > >> -#ifndef CONFIG_ONENAND_IPL > >> +#if !defined(CONFIG_ONENAND_IPL) && !defined(CONFIG_NAND_SPL) > >> beq stack_setup > >> -#endif /* CONFIG_ONENAND_IPL */ > >> +#endif /* !CONFIG_ONENAND_IPL && !CONFIG_NAND_SPL*/ > >> > >> #endif /* CONFIG_ONENAND_IPL */ > >> + > >> + } > >> + > >> + page_count = CFG_NAND_CHIP_SIZE / CFG_NAND_PAGE_SIZE; > > please use CONFIG_SYS_ or CONFIG_ > > Will do. > > > and why not detect it? > > Might be possible, I'll look into it to see if it's doable. tks
Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
