On 03/04/2014 08:01, Tim Harvey wrote:
> use the new iomux function and a macro to create a multi-dimensional array
> of iomux values without duplicating the defintions.
>
> Signed-off-by: Tim Harvey <thar...@gateworks.com>
> ---
> board/gateworks/gw_ventana/gw_ventana.c | 497
> ++++++++++++++++++++------------
> 1 file changed, 316 insertions(+), 181 deletions(-)
>
> diff --git a/board/gateworks/gw_ventana/gw_ventana.c
> b/board/gateworks/gw_ventana/gw_ventana.c
> index 2113740..ebf7e7d 100644
> --- a/board/gateworks/gw_ventana/gw_ventana.c
> +++ b/board/gateworks/gw_ventana/gw_ventana.c
> @@ -40,6 +40,17 @@
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +#define IOMUX(x) (MX6Q_##x), (MX6DL_##x)
> +#define SETUP_PAD(def) \
> +if (is_cpu_type(MXC_CPU_MX6Q)) { \
> + imx_iomux_v3_setup_pad(MX6Q_##def); \
> +} else { \
> + imx_iomux_v3_setup_pad(MX6DL_##def); \
> +}
This macro should be available for other boards, too.
> +#define SETUP_PADS(x) \
> + imx_iomux_v3_setup_multiple_pads_array(x, \
> + ARRAY_SIZE(x)/2, is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1, 2)
> +
> /* GPIO's common to all baseboards */
> #define GP_PHY_RST IMX_GPIO_NR(1, 30)
> #define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22)
> @@ -94,109 +105,145 @@ int board_type;
>
> /* UART1: Function varies per baseboard */
> iomux_v3_cfg_t const uart1_pads[] = {
> - MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> - MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> + IOMUX(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
> + IOMUX(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
> };
>
> /* UART2: Serial Console */
> iomux_v3_cfg_t const uart2_pads[] = {
> - MX6_PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> - MX6_PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> + IOMUX(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
> + IOMUX(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
> };
>
> #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
>
> /* I2C1: GSC */
> -struct i2c_pads_info i2c_pad_info0 = {
> +struct i2c_pads_info mx6q_i2c_pad_info0 = {
> .scl = {
> - .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
> - .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
> + .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
> + .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
What have you changed here ?
> .gp = IMX_GPIO_NR(3, 21)
> },
> .sda = {
> - .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
> - .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
> + .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
> + .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
> + .gp = IMX_GPIO_NR(3, 28)
> + }
> +};
> +struct i2c_pads_info mx6dl_i2c_pad_info0 = {
> + .scl = {
> + .i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
> + .gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
> + .gp = IMX_GPIO_NR(3, 21)
> + },
> + .sda = {
> + .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
> + .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
> .gp = IMX_GPIO_NR(3, 28)
> }
> };
>
> /* I2C2: PMIC/PCIe Switch/PCIe Clock/Mezz */
> -struct i2c_pads_info i2c_pad_info1 = {
> +struct i2c_pads_info mx6q_i2c_pad_info1 = {
> + .scl = {
> + .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
> + .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
> + .gp = IMX_GPIO_NR(4, 12)
> + },
> + .sda = {
> + .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
> + .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
> + .gp = IMX_GPIO_NR(4, 13)
> + }
> +};
> +struct i2c_pads_info mx6dl_i2c_pad_info1 = {
> .scl = {
> - .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
> - .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
> + .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
> + .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
> .gp = IMX_GPIO_NR(4, 12)
> },
> .sda = {
> - .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
> - .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
> + .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
> + .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
> .gp = IMX_GPIO_NR(4, 13)
> }
> };
>
> /* I2C3: Misc/Expansion */
> -struct i2c_pads_info i2c_pad_info2 = {
> +struct i2c_pads_info mx6q_i2c_pad_info2 = {
> .scl = {
> - .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
> - .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
> + .i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
> + .gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
> .gp = IMX_GPIO_NR(1, 3)
> },
> .sda = {
> - .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
> - .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
> + .i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
> + .gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
> + .gp = IMX_GPIO_NR(1, 6)
> + }
> +};
It seems you have already tried but you have not found a solution for
this. Anyway, repeating the same structure for all variants looks bad.
The solution with SETUP_PADS() and IOMUX is pretty better.
> +struct i2c_pads_info mx6dl_i2c_pad_info2 = {
> + .scl = {
> + .i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
> + .gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
> + .gp = IMX_GPIO_NR(1, 3)
> + },
> + .sda = {
> + .i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
> + .gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
> .gp = IMX_GPIO_NR(1, 6)
> }
> };
>
> /* MMC */
> iomux_v3_cfg_t const usdhc3_pads[] = {
> - MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> - MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> - MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> - MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> - MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> - MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> - MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
> + IOMUX(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
> + IOMUX(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
> };
>
> /* ENET */
> iomux_v3_cfg_t const enet_pads[] = {
> - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> - MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + IOMUX(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> + IOMUX(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
> /* PHY nRST */
> - MX6_PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> /* NAND */
> iomux_v3_cfg_t const nfc_pads[] = {
> - MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
> - MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> + IOMUX(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> #ifdef CONFIG_CMD_NAND
> @@ -205,7 +252,7 @@ static void setup_gpmi_nand(void)
> struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
>
> /* config gpmi nand iomux */
> - imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
> + SETUP_PADS(nfc_pads);
I will only suggest to use another name for the macro. SETUP_PADS seems
too generic and could conflict in future with other SOCs. IMX6_SETUP_PADS ?
>
> /* config gpmi and bch clock to 100 MHz */
> clrsetbits_le32(&mxc_ccm->cs2cdr,
> @@ -231,7 +278,7 @@ static void setup_gpmi_nand(void)
>
> static void setup_iomux_enet(void)
> {
> - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
> + SETUP_PADS(enet_pads);
>
> /* toggle PHY_RST# */
> gpio_direction_output(GP_PHY_RST, 0);
> @@ -241,35 +288,34 @@ static void setup_iomux_enet(void)
>
> static void setup_iomux_uart(void)
> {
> - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
> - imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
> + SETUP_PADS(uart1_pads);
> + SETUP_PADS(uart2_pads);
> }
>
> #ifdef CONFIG_USB_EHCI_MX6
> iomux_v3_cfg_t const usb_pads[] = {
> - MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(DIO_PAD_CTRL),
> - MX6_PAD_KEY_COL4__USB_OTG_OC | MUX_PAD_CTRL(DIO_PAD_CTRL),
> - MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(DIO_PAD_CTRL), /* OTG PWR */
> + IOMUX(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(DIO_PAD_CTRL)),
> + IOMUX(PAD_KEY_COL4__USB_OTG_OC | MUX_PAD_CTRL(DIO_PAD_CTRL)),
> + /* OTG PWR */
> + IOMUX(PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(DIO_PAD_CTRL)),
> };
>
> int board_ehci_hcd_init(int port)
> {
> struct ventana_board_info *info = &ventana_info;
>
> - imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
> + SETUP_PADS(usb_pads);
>
> /* Reset USB HUB (present on GW54xx/GW53xx) */
> switch (info->model[3]) {
> case '3': /* GW53xx */
> - imx_iomux_v3_setup_pad(MX6_PAD_GPIO_9__GPIO1_IO09|
> - MUX_PAD_CTRL(NO_PAD_CTRL));
> + SETUP_PAD(PAD_GPIO_9__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL));
> gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
> mdelay(2);
> gpio_set_value(IMX_GPIO_NR(1, 9), 1);
> break;
> case '4': /* GW54xx */
> - imx_iomux_v3_setup_pad(MX6_PAD_SD1_DAT0__GPIO1_IO16 |
> - MUX_PAD_CTRL(NO_PAD_CTRL));
> + SETUP_PAD(PAD_SD1_DAT0__GPIO1_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL));
> gpio_direction_output(IMX_GPIO_NR(1, 16), 0);
> mdelay(2);
> gpio_set_value(IMX_GPIO_NR(1, 16), 1);
> @@ -301,7 +347,7 @@ int board_mmc_getcd(struct mmc *mmc)
> int board_mmc_init(bd_t *bis)
> {
> /* Only one USDHC controller on Ventana */
> - imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
> + SETUP_PADS(usdhc3_pads);
> usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> usdhc_cfg.max_bus_width = 4;
>
> @@ -312,17 +358,16 @@ int board_mmc_init(bd_t *bis)
> #ifdef CONFIG_MXC_SPI
> iomux_v3_cfg_t const ecspi1_pads[] = {
> /* SS1 */
> - MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(SPI_PAD_CTRL),
> - MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
> - MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
> - MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
> + IOMUX(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(SPI_PAD_CTRL)),
> + IOMUX(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
> + IOMUX(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
> + IOMUX(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
> };
>
> static void setup_spi(void)
> {
> gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
> - imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
> - ARRAY_SIZE(ecspi1_pads));
> + SETUP_PADS(ecspi1_pads);
> }
> #endif
>
> @@ -453,118 +498,118 @@ read_eeprom(void)
> /* common to add baseboards */
> static iomux_v3_cfg_t const gw_gpio_pads[] = {
> /* MSATA_EN */
> - MX6_PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* RS232_EN# */
> - MX6_PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> /* prototype */
> static iomux_v3_cfg_t const gwproto_gpio_pads[] = {
> /* PANLEDG# */
> - MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PANLEDR# */
> - MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* LOCLED# */
> - MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* RS485_EN */
> - MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_PWREN# */
> - MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_IRQ# */
> - MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* VID_EN */
> - MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* DIOI2C_DIS# */
> - MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCICK_SSON */
> - MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCI_RST# */
> - MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> static iomux_v3_cfg_t const gw51xx_gpio_pads[] = {
> /* PANLEDG# */
> - MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PANLEDR# */
> - MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_PWREN# */
> - MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_IRQ# */
> - MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>
> /* GPS_SHDN */
> - MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* VID_PWR */
> - MX6_PAD_CSI0_DATA_EN__GPIO5_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_CSI0_DATA_EN__GPIO5_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCI_RST# */
> - MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> static iomux_v3_cfg_t const gw52xx_gpio_pads[] = {
> /* PANLEDG# */
> - MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PANLEDR# */
> - MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_PWREN# */
> - MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_IRQ# */
> - MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>
> /* MX6_LOCLED# */
> - MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* GPS_SHDN */
> - MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* USBOTG_SEL */
> - MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* VID_PWR */
> - MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCI_RST# */
> - MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> static iomux_v3_cfg_t const gw53xx_gpio_pads[] = {
> /* PANLEDG# */
> - MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PANLEDR# */
> - MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_PWREN# */
> - MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_IRQ# */
> - MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>
> /* MX6_LOCLED# */
> - MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* GPS_SHDN */
> - MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* VID_EN */
> - MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCI_RST# */
> - MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
> /* PANLEDG# */
> - MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PANLEDR# */
> - MX6_PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* MX6_LOCLED# */
> - MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* MIPI_DIO */
> - MX6_PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* RS485_EN */
> - MX6_PAD_EIM_D24__GPIO3_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_EIM_D24__GPIO3_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_PWREN# */
> - MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* IOEXP_IRQ# */
> - MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* DIOI2C_DIS# */
> - MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* DIOI2C_DIS# */
> - MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCICK_SSON */
> - MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> /* PCI_RST# */
> - MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + IOMUX(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> };
>
> /*
> @@ -572,9 +617,9 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
> * be pinmuxed as a GPIO or in some cases a PWM
> */
> struct dio_cfg {
> - iomux_v3_cfg_t gpio_padmux;
> + iomux_v3_cfg_t gpio_padmux[2];
> unsigned gpio_param;
> - iomux_v3_cfg_t pwm_padmux;
> + iomux_v3_cfg_t pwm_padmux[2];
> unsigned pwm_param;
> };
>
> @@ -601,16 +646,32 @@ struct ventana gpio_cfg[] = {
> /* GW5400proto */
> {
> .gpio_pads = gw54xx_gpio_pads,
> - .num_pads = ARRAY_SIZE(gw54xx_gpio_pads),
> + .num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2,
> .dio_cfg = {
> - { MX6_PAD_GPIO_9__GPIO1_IO09, IMX_GPIO_NR(1, 9),
> - MX6_PAD_GPIO_9__PWM1_OUT, 1 },
> - { MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
> - MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
> - { MX6_PAD_SD4_DAT1__GPIO2_IO09, IMX_GPIO_NR(2, 9),
> - MX6_PAD_SD4_DAT1__PWM3_OUT, 3 },
> - { MX6_PAD_SD4_DAT2__GPIO2_IO10, IMX_GPIO_NR(2, 10),
> - MX6_PAD_SD4_DAT2__PWM4_OUT, 4 },
> + {
> + { IOMUX(PAD_GPIO_9__GPIO1_IO09) },
> + IMX_GPIO_NR(1, 9),
> + { IOMUX(PAD_GPIO_9__PWM1_OUT) },
> + 1
> + },
> + {
> + { IOMUX(PAD_SD1_DAT2__GPIO1_IO19) },
> + IMX_GPIO_NR(1, 19),
> + { IOMUX(PAD_SD1_DAT2__PWM2_OUT) },
> + 2
> + },
> + {
> + { IOMUX(PAD_SD4_DAT1__GPIO2_IO09) },
> + IMX_GPIO_NR(2, 9),
> + { IOMUX(PAD_SD4_DAT1__PWM3_OUT) },
> + 3
> + },
> + {
> + { IOMUX(PAD_SD4_DAT2__GPIO2_IO10) },
> + IMX_GPIO_NR(2, 10),
> + { IOMUX(PAD_SD4_DAT2__PWM4_OUT) },
> + 4
> + },
> },
> .leds = {
> IMX_GPIO_NR(4, 6),
> @@ -628,16 +689,32 @@ struct ventana gpio_cfg[] = {
> /* GW51xx */
> {
> .gpio_pads = gw51xx_gpio_pads,
> - .num_pads = ARRAY_SIZE(gw51xx_gpio_pads),
> + .num_pads = ARRAY_SIZE(gw51xx_gpio_pads)/2,
> .dio_cfg = {
> - { MX6_PAD_SD1_DAT0__GPIO1_IO16, IMX_GPIO_NR(1, 16),
> - 0, 0 },
> - { MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
> - MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
> - { MX6_PAD_SD1_DAT1__GPIO1_IO17, IMX_GPIO_NR(1, 17),
> - MX6_PAD_SD1_DAT1__PWM3_OUT, 3 },
> - { MX6_PAD_SD1_CMD__GPIO1_IO18, IMX_GPIO_NR(1, 18),
> - MX6_PAD_SD1_CMD__PWM4_OUT, 4 },
> + {
> + { IOMUX(PAD_SD1_DAT0__GPIO1_IO16) },
> + IMX_GPIO_NR(1, 16),
> + { 0, 0 },
> + 0
> + },
> + {
> + { IOMUX(PAD_SD1_DAT2__GPIO1_IO19) },
> + IMX_GPIO_NR(1, 19),
> + { IOMUX(PAD_SD1_DAT2__PWM2_OUT) },
> + 2
> + },
> + {
> + { IOMUX(PAD_SD1_DAT1__GPIO1_IO17) },
> + IMX_GPIO_NR(1, 17),
> + { IOMUX(PAD_SD1_DAT1__PWM3_OUT) },
> + 3
> + },
> + {
> + { IOMUX(PAD_SD1_CMD__GPIO1_IO18) },
> + IMX_GPIO_NR(1, 18),
> + { IOMUX(PAD_SD1_CMD__PWM4_OUT) },
> + 4
> + },
> },
> .leds = {
> IMX_GPIO_NR(4, 6),
> @@ -653,16 +730,32 @@ struct ventana gpio_cfg[] = {
> /* GW52xx */
> {
> .gpio_pads = gw52xx_gpio_pads,
> - .num_pads = ARRAY_SIZE(gw52xx_gpio_pads),
> + .num_pads = ARRAY_SIZE(gw52xx_gpio_pads)/2,
> .dio_cfg = {
> - { MX6_PAD_SD1_DAT0__GPIO1_IO16, IMX_GPIO_NR(1, 16),
> - 0, 0 },
> - { MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
> - MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
> - { MX6_PAD_SD1_DAT1__GPIO1_IO17, IMX_GPIO_NR(1, 17),
> - MX6_PAD_SD1_DAT1__PWM3_OUT, 3 },
> - { MX6_PAD_SD1_CLK__GPIO1_IO20, IMX_GPIO_NR(1, 20),
> - 0, 0 },
> + {
> + { IOMUX(PAD_SD1_DAT0__GPIO1_IO16) },
> + IMX_GPIO_NR(1, 16),
> + { 0, 0 },
> + 0
> + },
> + {
> + { IOMUX(PAD_SD1_DAT2__GPIO1_IO19) },
> + IMX_GPIO_NR(1, 19),
> + { IOMUX(PAD_SD1_DAT2__PWM2_OUT) },
> + 2
> + },
> + {
> + { IOMUX(PAD_SD1_DAT1__GPIO1_IO17) },
> + IMX_GPIO_NR(1, 17),
> + { IOMUX(PAD_SD1_DAT1__PWM3_OUT) },
> + 3
> + },
> + {
> + { IOMUX(PAD_SD1_CLK__GPIO1_IO20) },
> + IMX_GPIO_NR(1, 20),
> + { 0, 0 },
> + 0
> + },
> },
> .leds = {
> IMX_GPIO_NR(4, 6),
> @@ -680,16 +773,32 @@ struct ventana gpio_cfg[] = {
> /* GW53xx */
> {
> .gpio_pads = gw53xx_gpio_pads,
> - .num_pads = ARRAY_SIZE(gw53xx_gpio_pads),
> + .num_pads = ARRAY_SIZE(gw53xx_gpio_pads)/2,
> .dio_cfg = {
> - { MX6_PAD_SD1_DAT0__GPIO1_IO16, IMX_GPIO_NR(1, 16),
> - 0, 0 },
> - { MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
> - MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
> - { MX6_PAD_SD1_DAT1__GPIO1_IO17, IMX_GPIO_NR(1, 17),
> - MX6_PAD_SD1_DAT1__PWM3_OUT, 3 },
> - { MX6_PAD_SD1_CLK__GPIO1_IO20, IMX_GPIO_NR(1, 20),
> - 0, 0 },
> + {
> + { IOMUX(PAD_SD1_DAT0__GPIO1_IO16) },
> + IMX_GPIO_NR(1, 16),
> + { 0, 0 },
> + 0
> + },
> + {
> + { IOMUX(PAD_SD1_DAT2__GPIO1_IO19) },
> + IMX_GPIO_NR(1, 19),
> + { IOMUX(PAD_SD1_DAT2__PWM2_OUT) },
> + 2
> + },
> + {
> + { IOMUX(PAD_SD1_DAT1__GPIO1_IO17) },
> + IMX_GPIO_NR(1, 17),
> + { IOMUX(PAD_SD1_DAT1__PWM3_OUT) },
> + 3
> + },
> + {
> + {IOMUX(PAD_SD1_CLK__GPIO1_IO20) },
> + IMX_GPIO_NR(1, 20),
> + { 0, 0 },
> + 0
> + },
> },
> .leds = {
> IMX_GPIO_NR(4, 6),
> @@ -706,16 +815,32 @@ struct ventana gpio_cfg[] = {
> /* GW54xx */
> {
> .gpio_pads = gw54xx_gpio_pads,
> - .num_pads = ARRAY_SIZE(gw54xx_gpio_pads),
> + .num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2,
> .dio_cfg = {
> - { MX6_PAD_GPIO_9__GPIO1_IO09, IMX_GPIO_NR(1, 9),
> - MX6_PAD_GPIO_9__PWM1_OUT, 1 },
> - { MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
> - MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
> - { MX6_PAD_SD4_DAT1__GPIO2_IO09, IMX_GPIO_NR(2, 9),
> - MX6_PAD_SD4_DAT1__PWM3_OUT, 3 },
> - { MX6_PAD_SD4_DAT2__GPIO2_IO10, IMX_GPIO_NR(2, 10),
> - MX6_PAD_SD4_DAT2__PWM4_OUT, 4 },
> + {
> + { IOMUX(PAD_GPIO_9__GPIO1_IO09) },
> + IMX_GPIO_NR(1, 9),
> + { IOMUX(PAD_GPIO_9__PWM1_OUT) },
> + 1
> + },
> + {
> + { IOMUX(PAD_SD1_DAT2__GPIO1_IO19) },
> + IMX_GPIO_NR(1, 19),
> + { IOMUX(PAD_SD1_DAT2__PWM2_OUT) },
> + 2
> + },
> + {
> + { IOMUX(PAD_SD4_DAT1__GPIO2_IO09) },
> + IMX_GPIO_NR(2, 9),
> + { IOMUX(PAD_SD4_DAT1__PWM3_OUT) },
> + 3
> + },
> + {
> + { IOMUX(PAD_SD4_DAT2__GPIO2_IO10) },
> + IMX_GPIO_NR(2, 10),
> + { IOMUX(PAD_SD4_DAT2__PWM4_OUT) },
> + 4
> + },
> },
> .leds = {
> IMX_GPIO_NR(4, 6),
> @@ -805,6 +930,7 @@ static void setup_board_gpio(int board)
> for (i = 0; i < 4; i++) {
> struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i];
> unsigned ctrl = DIO_PAD_CTRL;
> + unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1;
>
> sprintf(arg, "dio%d", i);
> if (!hwconfig(arg))
> @@ -819,14 +945,14 @@ static void setup_board_gpio(int board)
> cfg->gpio_param%32,
> cfg->gpio_param);
> }
> - imx_iomux_v3_setup_pad(cfg->gpio_padmux |
> + imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] |
> MUX_PAD_CTRL(ctrl));
> gpio_direction_input(cfg->gpio_param);
> } else if (hwconfig_subarg_cmp("dio2", "mode", "pwm") &&
> cfg->pwm_padmux) {
> if (!quiet)
> printf("DIO%d: pwm%d\n", i, cfg->pwm_param);
> - imx_iomux_v3_setup_pad(cfg->pwm_padmux |
> + imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] |
> MUX_PAD_CTRL(ctrl));
> }
> }
> @@ -846,9 +972,10 @@ static void setup_board_gpio(int board)
> int imx6_pcie_toggle_reset(void)
> {
> if (board_type < GW_UNKNOWN) {
> - gpio_direction_output(gpio_cfg[board_type].pcie_rst, 0);
> + uint pin = gpio_cfg[board_type].pcie_rst;
> + gpio_direction_output(pin, 0);
> mdelay(50);
> - gpio_direction_output(gpio_cfg[board_type].pcie_rst, 1);
> + gpio_direction_output(pin, 1);
> }
> return 0;
> }
> @@ -916,9 +1043,15 @@ int board_init(void)
> #ifdef CONFIG_MXC_SPI
> setup_spi();
> #endif
> - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
> - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
> - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
> + if (is_cpu_type(MXC_CPU_MX6Q)) {
> + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info0);
> + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
> + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info2);
> + } else {
> + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info0);
> + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
> + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
> + }
>
> #ifdef CONFIG_CMD_SATA
> setup_sata();
> @@ -927,11 +1060,13 @@ int board_init(void)
> board_type = read_eeprom();
>
> /* board-specifc GPIO iomux */
> + SETUP_PADS(gw_gpio_pads);
> if (board_type < GW_UNKNOWN) {
> - imx_iomux_v3_setup_multiple_pads(gw_gpio_pads,
> - ARRAY_SIZE(gw_gpio_pads));
> - imx_iomux_v3_setup_multiple_pads(gpio_cfg[board_type].gpio_pads,
> - gpio_cfg[board_type].num_pads);
> + iomux_v3_cfg_t const *p = gpio_cfg[board_type].gpio_pads;
> + int count = gpio_cfg[board_type].num_pads;
> + unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1;
> +
> + imx_iomux_v3_setup_multiple_pads_array(p, count, cputype, 2);
> }
>
> return 0;
>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
