Zoom1 was wrongly setup for LAN91C96. Fix it by enabling
LAN9211.
Signed-off-by: Nishanth Menon <n...@ti.com>
---
board/logicpd/zoom1/zoom1.c | 20 ++++++++++++++++++--
include/configs/omap3_zoom1.h | 10 +++++++++-
2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 56e512f..461a852 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -102,9 +102,25 @@ int board_mmc_init(bd_t *bis)
int board_eth_init(bd_t *bis)
{
int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
+
+#ifdef CONFIG_SMC911X
+#define STR_ENV_ETHADDR "ethaddr"
+
+ struct eth_device *dev;
+ uchar eth_addr[6];
+
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+ if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) {
+ dev = eth_get_dev_by_index(0);
+ if (dev) {
+ eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr);
+ } else {
+ printf("zoom1: Couldn't get eth device\n");
+ rc = -1;
+ }
+ }
#endif
+
return rc;
}
#endif
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index c4178d8..4a4dfd9 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -115,7 +115,7 @@
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_IMI /* iminfo */
#undef CONFIG_CMD_IMLS /* List all found images */
-#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
@@ -265,4 +265,12 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
+#ifdef CONFIG_CMD_NET
+/* Ethernet (LAN9211 from SMSC9118 family) */
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE DEBUG_BASE
+
+#endif
+
#endif /* __CONFIG_H */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
