On Mon, 2014-03-31 at 15:35 +0530, Prabhakar Kushwaha wrote: > Objective of this target to have concatenate binary having > - SPL binary in PBL command format > - U-boot binary > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > --- > Makefile | 19 +++++++++++++++++++ > README | 4 ++++ > 2 files changed, 23 insertions(+) > > diff --git a/Makefile b/Makefile > index e5f5a8c..e7a0838 100644 > --- a/Makefile > +++ b/Makefile > @@ -699,7 +699,11 @@ ALL-y += u-boot.srec u-boot.bin System.map > > ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin > ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin > +ifeq ($(CONFIG_RAMBOOT_SPLPBL),y) > +ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin > +else > ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl > +endif > ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin > ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img > ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin > @@ -882,6 +886,21 @@ endif > u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE > $(call if_changed,cat) > > +#Add a target to create boot binary having SPL binary in PBI format > +#concatenated with u-boot binary. It is need by PowerPC SoC having > +#internal SRAM <= 512KB. > +MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ > + -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage > + > +spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE > + $(call if_changed,mkimage) > + > +OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary > --pad-to=$(CONFIG_SPL_PAD_TO) \ > + --gap-fill=0xff > + > +u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE > + $(call if_changed,pad_cat) > + > # PPC4xx needs the SPL at the end of the image, since the reset vector > # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target > # and need to introduce a new build target with the full blown U-Boot > diff --git a/README b/README > index d8d5f60..7690fdb 100644 > --- a/README > +++ b/README > @@ -486,6 +486,10 @@ The following options need to be configured: > PBI commands can be used to configure SoC before it starts the > execution. > Please refer doc/README.pblimage for more details > > + CONFIG_RAMBOOT_SPLPBL > + It adds a target to create boot binary having SPL binary in PBI > format > + concatenated with u-boot binary.
What does this have to do with RAMBOOT? -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
