Hi Eli, On 04/01/2014 04:09 PM, Eli Nidam wrote: > Hi Roger, > > In u-boot I tried to run twice the command “scsi init” and on the second time > it’s hung,, > after debug I found the patch ahci: Fix cache align error messages > replace the malloc with ALLOC_CACHE_ALIGN_BUFFER. > And remove the line free(tmpid); > > 1. One more free should be remove in line 653 “free(ataid[port]);” > This is why the second scsi init is hung. > 2. Actually I revert this patch because the ALLOC_CACHE_ALIGN_BUFFER is use > the buffer from stack and the ataid[] is used from other routine.
You are right. My patch is all messed up and better to revert it, sorry. Do you still get the below messages after the revert? ERROR: v7_dcache_inval_range - start address is not aligned - 0xfee46648 ERROR: v7_dcache_inval_range - stop address is not aligned - 0xfee46848 cheers, -roger > > Please let me if I wrong. > > Thanks > > Eli Nidam > Marvell Israel – SW Engineer > 6 Hamada Street > Mordot HaCarmel Industrial Park > Yokneam, 20692, Israel > Email: el...@marvell.com > Office: +972.4.9091167 - OnNet: 704.1xxx > Fax: +972.4.9091501 > Mobile: +972.54.2490706 > Web site: http://www.marvell.com > > This message may contain confidential, proprietary or legally privileged > information. The information is intended only for the use of the individual > or entity named above. If the reader of this message is not the intended > recipient, you are hereby notified that any dissemination, distribution or > copying of this communication is strictly prohibited. If you have received > this communication in error, please notify us immediately by telephone or by > e-mail and delete the message from your computer. > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
