Hi Simon, > Commit be3b51aa did this mostly, but several have been added since. > Do the job again. > > Signed-off-by: Simon Glass <s...@chromium.org> > --- > > drivers/power/power_fsl.c | 6 +++--- > include/configs/arndale.h | 4 ++-- > include/configs/exynos5250-dt.h | 2 +- > include/configs/mx25pdk.h | 2 +- > include/configs/mx35pdk.h | 2 +- > include/configs/mx53evk.h | 2 +- > include/configs/mx53loco.h | 2 +- > include/configs/woodburn_common.h | 2 +- > 8 files changed, 11 insertions(+), 11 deletions(-) > > diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c > index ac0b541..a64161b 100644 > --- a/drivers/power/power_fsl.c > +++ b/drivers/power/power_fsl.c > @@ -11,9 +11,9 @@ > #include <fsl_pmic.h> > #include <errno.h> > > -#if defined(CONFIG_PMIC_FSL_MC13892) > +#if defined(CONFIG_POWER_FSL_MC13892) > #define FSL_PMIC_I2C_LENGTH 3 > -#elif defined(CONFIG_PMIC_FSL_MC34704) > +#elif defined(CONFIG_POWER_FSL_MC34704) > #define FSL_PMIC_I2C_LENGTH 1 > #endif > > @@ -51,7 +51,7 @@ int pmic_init(unsigned char bus) > p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR; > p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH; > #else > -#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C" > +#error "You must select CONFIG_POWER_SPI or CONFIG_POWER_I2C" > #endif > > return 0; > diff --git a/include/configs/arndale.h b/include/configs/arndale.h > index 515facf..30ecd45 100644 > --- a/include/configs/arndale.h > +++ b/include/configs/arndale.h > @@ -224,8 +224,8 @@ > > /* PMIC */ > #define CONFIG_PMIC > -#define CONFIG_PMIC_I2C > -#define CONFIG_PMIC_MAX77686 > +#define CONFIG_POWER_I2C > +#define CONFIG_POWER_MAX77686 > > #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale > > diff --git a/include/configs/exynos5250-dt.h > b/include/configs/exynos5250-dt.h index b7ff472..9d1d56a 100644 > --- a/include/configs/exynos5250-dt.h > +++ b/include/configs/exynos5250-dt.h > @@ -45,7 +45,7 @@ > #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK > > /* PMIC */ > -#define CONFIG_PMIC_MAX77686 > +#define CONFIG_POWER_MAX77686 > > /* Sound */ > #define CONFIG_CMD_SOUND > diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h > index af6aafa..571d45a 100644 > --- a/include/configs/mx25pdk.h > +++ b/include/configs/mx25pdk.h > @@ -106,7 +106,7 @@ > #define CONFIG_POWER > #define CONFIG_POWER_I2C > #define CONFIG_POWER_FSL > -#define CONFIG_PMIC_FSL_MC34704 > +#define CONFIG_POWER_FSL_MC34704 > #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54 > > #define CONFIG_DOS_PARTITION > diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h > index 0a46f4c..ab48144 100644 > --- a/include/configs/mx35pdk.h > +++ b/include/configs/mx35pdk.h > @@ -52,7 +52,7 @@ > #define CONFIG_POWER > #define CONFIG_POWER_I2C > #define CONFIG_POWER_FSL > -#define CONFIG_PMIC_FSL_MC13892 > +#define CONFIG_POWER_FSL_MC13892 > #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 > #define CONFIG_RTC_MC13XXX > > diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h > index 3f0d80a..042cdd0 100644 > --- a/include/configs/mx53evk.h > +++ b/include/configs/mx53evk.h > @@ -45,7 +45,7 @@ > #define CONFIG_POWER_I2C > #define CONFIG_POWER_FSL > #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 > -#define CONFIG_PMIC_FSL_MC13892 > +#define CONFIG_POWER_FSL_MC13892 > #define CONFIG_RTC_MC13XXX > > /* MMC Configs */ > diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h > index 1415584..365d072 100644 > --- a/include/configs/mx53loco.h > +++ b/include/configs/mx53loco.h > @@ -80,7 +80,7 @@ > #define CONFIG_POWER_I2C > #define CONFIG_DIALOG_POWER > #define CONFIG_POWER_FSL > -#define CONFIG_PMIC_FSL_MC13892 > +#define CONFIG_POWER_FSL_MC13892 > #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 > #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 > > diff --git a/include/configs/woodburn_common.h > b/include/configs/woodburn_common.h index 695bc23..259205e 100644 > --- a/include/configs/woodburn_common.h > +++ b/include/configs/woodburn_common.h > @@ -55,7 +55,7 @@ > #define CONFIG_POWER > #define CONFIG_POWER_I2C > #define CONFIG_POWER_FSL > -#define CONFIG_PMIC_FSL_MC13892 > +#define CONFIG_POWER_FSL_MC13892 > #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 > #define CONFIG_RTC_MC13XXX >
Acked-by: Lukasz Majewski <l.majew...@samsung.com> -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
