Hi,
On 03/27/2014 09:08 AM, Tim Sander wrote:
> Hi
>
> As i have seen that the Xilinx support has entered master i just tried to
> boot
> it on a Xilinx Zynx Zedboard Rev. D. The build works with the xilinx git tree
> so i am pretty confident that its not some issues with bootgen or the
> embedded
> fpga image.
>
> The board loads the fpga which can be seen by the blue "done" led of the
> ZedBoard. But then the LED turns off and about after a second or so it just
> lights up shortly again to turn off again. So it seems as if the board is
> somehow caught in a reboot loop. Any ideas what might be wrong?
>
> I am building with:
> export PATH=~/xilinx/SDK/2013.3/gnu/arm/lin/bin:$PATH
> export CROSS_COMPILE=arm-xilinx-linux-gnueabi-
> make clean
> make distclean
> make zynq_zed_config
> make
>
> The BOOT.BIN is build
> xilinx/SDK/2013.3/bin/lin64/bootgen -image u-boot.bif -w on -o BOOT.BIN
>
> And u-boot.bif looks like that:
> the_ROM_image:
> {
> [bootloader]zynq_fsbl_0.elf
> system.bit
> u-boot.elf
> }mainline u-boot support is using configuration based on dts files (OF_CONTROL) And because our DTSes are almost empty in mainline I expect you are not able to see anything from u-boot. I recommend you to copy dts file from xilinx kernel and then use u-boot-dtb version. Or the second option is to remove OF_CONTROL from zynq-common.h file and then I hope you should be able to see something on console. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
