We use dynamical mtdparts partition instead of directly puting mtd partitions nodes in device tree.
Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> --- Verified on T2080QDS. include/configs/T208xQDS.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 5ab4de6..639cc4e 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -708,6 +708,23 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DOS_PARTITION #endif + +/* + * Dynamic MTD Partition support with mtdparts + */ +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=ff800000.flash," \ + "spi0=spife110000.0" +#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ + "128k(dtb),96m(fs),-(user);ff800000.flash:1m(uboot)," \ + "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ + "1m(uboot),5m(kernel),128k(dtb),-(user)" +#endif + /* * Environment */ -- 1.8.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
