> -----Original Message----- > From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagn...@jcrosoft.com] > Sent: Tuesday, May 05, 2009 3:48 AM > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; Ashish Karkare; Prabhanjan Sarnaik; > Ronen Shitrit > Subject: Re: [U-Boot] [PATCH v6] Marvell MV88F6281GTW_GE Board support > > > +/* > > + * Default values for MPP registers > > + * > > + * There are maximum 64 Multi-Pourpose Pins on Kirkwood > > + * Each MPP functionality can be configuration by a 4bit value > > + * of MPP control reg, the value and associated > functionality is SoC > > + * varient dependent > > + */ > > +#define MV88F6281GTW_GE_MPP0_7 0x01112222 > > +#define MV88F6281GTW_GE_MPP8_15 0x11103311 > > +#define MV88F6281GTW_GE_MPP16_23 0x00001111 > > +#define MV88F6281GTW_GE_MPP24_31 0x22222222 > > +#define MV88F6281GTW_GE_MPP32_39 0x40440222 > > +#define MV88F6281GTW_GE_MPP40_47 0x00004444 > > +#define MV88F6281GTW_GE_MPP48_55 0x00000000 > > + > > +#endif /* __MV88F6281GTW_GE_H */ > > diff --git a/board/Marvell/mv88f6281gtw_ge/u-boot.lds > > b/board/Marvell/mv88f6281gtw_ge/u-boot.lds > > new file mode 100644 > > index 0000000..9695f3f > > --- /dev/null > > +++ b/board/Marvell/mv88f6281gtw_ge/u-boot.lds > > @@ -0,0 +1,53 @@ > > +/* > > + * (C) Copyright 2009 > > + * Marvell Semiconductor <www.marvell.com> > > + * Prafulla Wadaskar <prafu...@marvell.com> > it's just a copy of other lds please do not add the Marvell > Copyright as it's really the same as a lot of arm9 please > move to cpu/arm926ejs/kirwood at least Okay, I will do it
> > I will clean the other lds myself later > > You do not add yourselft as Maintainer of the board I guess > you miss it I was unaware, I will do it, any reference will help otherwise I will find it :-) Thanks and regards.. Prafulla . . > > otherwise it's ok > > Best Regards, > J. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
