On Saturday 15 Mar 2014 16:59:05 Fabio Estevam wrote: > On Sat, Mar 15, 2014 at 4:08 AM, Benedict Hewson > > <bened...@hewson-venieri.com> wrote: > > In the fec_get_hwaddr() function I have printed out the values returned by > > imx_get_mac_from_fuse() and they are all 0. > > > > I have read in the README.imx6 file that the MAC address is stored in the > > fuse bank. The default reset value according to the datasheet is 0, so is > > this programmed by Freescale or the board vendor ? > > Looks like the vendor did not program the MAC address in the fuses then. > > Does it work if you pass 'setenv ethaddr <macaddr>'? > > Regards, > > Fabio Estevam
yes using setenv ethaddr and setenv ipaddr allows me to ping other computers and to ping the board. I was wondering why if I try to set ethaddr as part of CONFIG_EXTRA_ENV_SETTINGS it is not there when I boot the board. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot