Hi Andreas, On Sun, 09 Mar 2014 21:52:44 +0100, Andreas Färber <afaer...@suse.de> wrote:
> Hi, > > Am 09.03.2014 21:34, schrieb Albert ARIBAUD: > > On Sun, 09 Mar 2014 21:22:34 +0100, Andreas Färber <afaer...@suse.de> > > wrote: > >> Am 09.03.2014 21:05, schrieb Albert ARIBAUD: > >>> On Mon, 3 Mar 2014 08:00:52 +0100, Albert ARIBAUD > >>> <albert.u.b...@aribaud.net> wrote: > >>>> On Sun, 02 Mar 2014 23:00:19 +0100, Andreas Färber > >>>> <afaer...@suse.de> wrote: > >>>>> Am 02.03.2014 21:57, schrieb Andreas Färber: > >>>>>> Am 02.03.2014 20:15, schrieb Albert ARIBAUD: > >>>>>>> On Sun, 02 Mar 2014 18:57:14 +0100, Andreas Färber <afaer...@suse.de> > >>>>>>> wrote: > >>>>>>>> Am 22.02.2014 14:27, schrieb Albert ARIBAUD: > >>>>>>>>> On Thu, 13 Feb 2014 12:39:07 +0100, Albert ARIBAUD > >>>>>>>>> <albert.u.b...@aribaud.net> wrote: > >>>>>>>>> > >>>>>>>>>> Can you point me to the toolchain you are using, and if you are not > >>>>>>>>>> building mainline code, can you make this code available to me > >>>>>>>>>> somehow? > >>>>>> [...] > >>>>>>>> Our latest GCC 4.8.2 can be found here: > >>>>>>>> https://build.opensuse.org/package/show/openSUSE:Factory:ARM/gcc48 > >>>>>>>> > >>>>>>>> Matching binutils 2.24 are here: > >>>>>>>> https://build.opensuse.org/package/show/openSUSE:Factory:ARM/binutils > >>>>>>>> > >>>>>>>> Our latest U-Boot tarball and patches: > >>>>>>>> https://build.opensuse.org/package/show/Base:System/u-boot > >>>>>>>> Build logs can be found in the u-boot-* packages in the same project, > >>>>>>>> with underscores stripped, e.g.: > >>>>>>>> https://build.opensuse.org/package/show/Base:System/u-boot-am335xevm > >>>>>>> > >>>>>>> Thanks for your reply. Apparently, the problem does not appear for the > >>>>>>> boards in mainline U-Boot which I listed above with the source code > >>>>>>> from our v2014.01 tag and using gcc 4.8.1 from Linaro. I can install > >>>>>>> 4.8.2, but meanwhile, can you try to build v2014.01 for these boards > >>>>>>> with your setup? > >>>>>>> > >>>>>>> am335x_evm colibri_t20_iris highbank mx53loco omap3_beagle > >>>>>>> omap4_panda paz00 rpi_b > >>>>>> > >>>>>> I have commented out the patch in: > >>>>>> https://build.opensuse.org/project/show/home:a_faerber:branches:Base:System > >>>>>> > >>>>>> While there are apparently frequent rebuilds scheduled ATM, it seemed > >>>>>> like the colibri_t20_iris config intermittently built OK without it. > >>>>>> Maybe some gcc 4.8 stable branch update [1] resolved it ... will keep > >>>>>> an > >>>>>> eye on the build status to confirm. If everything builds, I'm happy. > >>>>> > >>>>> Nah, still fails without the patch: > >>>>> > >>>>> [ 178s] gcc -E -g -Os -ffunction-sections -fdata-sections > >>>>> -fno-common -ffixed-r9 -msoft-float -D__KERNEL__ > >>>>> -DCONFIG_SYS_TEXT_BASE=0x0010E000 > >>>>> -I/home/abuild/rpmbuild/BUILD/u-boot-2014.01/include > >>>>> -I/home/abuild/rpmbuild/BUILD/u-boot-2014.01/arch/arm/include > >>>>> -fno-builtin -ffreestanding -nostdinc -isystem > >>>>> /usr/lib/gcc/armv7hl-suse-linux-gnueabi/4.8/include -pipe -DCONFIG_ARM > >>>>> -D__ARM__ -marm -mno-thumb-interwork -mabi=aapcs-linux > >>>>> -mword-relocations -march=armv7-a -include > >>>>> /home/abuild/rpmbuild/BUILD/u-boot-2014.01/include/u-boot/u-boot.lds.h > >>>>> -DCPUDIR=arch/arm/cpu/armv7 -ansi -D__ASSEMBLY__ -P - > >>>>> </home/abuild/rpmbuild/BUILD/u-boot-2014.01/arch/arm/cpu/u-boot.lds > >>>>>> u-boot.lds > >>>>> [ 178s] cd /home/abuild/rpmbuild/BUILD/u-boot-2014.01 && ld.bfd -pie > >>>>> -T u-boot.lds --gc-sections -Bstatic -Ttext 0x0010E000 > >>>>> arch/arm/cpu/armv7/start.o --start-group arch/arm/cpu/armv7/built-in.o > >>>>> arch/arm/cpu/armv7/tegra20/built-in.o arch/arm/cpu/built-in.o > >>>>> arch/arm/lib/built-in.o board/toradex/colibri_t20_iris/built-in.o > >>>>> common/built-in.o disk/built-in.o drivers/built-in.o > >>>>> drivers/dma/built-in.o drivers/gpio/built-in.o drivers/i2c/built-in.o > >>>>> drivers/input/built-in.o drivers/mmc/built-in.o drivers/mtd/built-in.o > >>>>> drivers/mtd/nand/built-in.o drivers/mtd/onenand/built-in.o > >>>>> drivers/mtd/spi/built-in.o drivers/net/built-in.o > >>>>> drivers/net/phy/built-in.o drivers/pci/built-in.o > >>>>> drivers/power/battery/built-in.o drivers/power/built-in.o > >>>>> drivers/power/fuel_gauge/built-in.o drivers/power/mfd/built-in.o > >>>>> drivers/power/pmic/built-in.o drivers/serial/built-in.o > >>>>> drivers/spi/built-in.o drivers/usb/eth/built-in.o > >>>>> drivers/usb/gadget/built-in.o drivers/usb/host/built-in.o > >>>>> drivers/usb/musb-new/built-in.o drivers/usb/musb/built-in.o > >>>>> drivers/usb/phy/built-in.o drivers/usb/ulpi/built-in.o fs/built-in.o > >>>>> lib/built-in.o lib/libfdt/built-in.o net/built-in.o test/built-in.o > >>>>> --end-group > >>>>> /home/abuild/rpmbuild/BUILD/u-boot-2014.01/arch/arm/lib/eabi_compat.o > >>>>> -L /usr/lib/gcc/armv7hl-suse-linux-gnueabi/4.8 -lgcc -Map u-boot.map -o > >>>>> u-boot > >>>>> [ 178s] ld.bfd: u-boot: could not find output section .gnu.hash > >>>>> [ 178s] ld.bfd: final link failed: Nonrepresentable section on output > >>>>> [ 178s] Makefile:556: recipe for target 'u-boot' failed > >>>>> [ 178s] make: *** [u-boot] Error 1 > >>>> > >>>> You are trying this with your codebase, right? If so, can you try and > >>>> build vanilla v2014.01 with the exact same build environment? > >> > >> Commented out all our patches at: > >> https://build.opensuse.org/project/show/home:a_faerber:branches:Base:System > >> > >> Failure of any sunxi-added targets is to be expected, of course. > > > > Not sure I'm getting this: if you build vanilla v2014.01, there > > shouldn't be any sunxi target built at all, should it? > > I removed the patches from the spec file in our build service. That > doesn't drop the packages for those no longer patched-in targets, so > failures of those targets are to be expected. I am not building locally. > > Here's a vanilla "highbank" target failing: > https://build.opensuse.org/package/live_build_log/home:a_faerber:branches:Base:System/u-boot-highbank/openSUSE_Factory_ARM/armv7l > > >>> If it > >>>> builds fine, then can you tell me which changes your patch(es) made to > >>>> linker scripts in your tree wrt 2014.01? > >>> > >>> Ping. > >> > >> I had previously pointed to our patches and explained that they do not > >> touch on any existing linker scripts. They merely change CONFIG_ > >> options, tweak environment settings and add the sunxi targets. > > > > I am not asking about changing linker scripts; I am asking about > > trying your build environment on the pristine v2014.01 codebase, e.g. > > build all mainline ARM targets with your toolchains. > > You did ask above "which changes" our patches "made to linker scripts". > And the answer is: None, apart from the already commented-out > gnuhash.patch, which corresponds to this very patch under discussion. Understood -- my question about linker script changes was conditioned to succeeding in building pristine v2014.01, so I had mentally put it aside until v2014.01 build results are known. > >> As for the other open question, OBS does not package build > >> intermediaries of failed builds, so I'll need to reproduce it locally. > >> ATM I'm lacking time because QEMU is about to enter Hard Freeze for 2.0. > > > > Could you just run this in a git clone of U-Boot with v2014.01 checked > > out? > > > > ARCH=arm CROSS_COMPILE=your-toolchain-prefix- ./MAKEALL -a arm > > > > It would build all targets unattended using your toolchain (assuming it > > is in your PATH of course). > > My local ARM machines are all 13.1, not Factory, but I can try running > that command there later. Thanks! > Amicalement, > Andreas Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
