nand_spl_load_image() can also be used for non TPL framework.
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
---
Changes for v2: Sending as it is
Changes for v3: Sending as it is
Changes for v4: Sending as it is
drivers/mtd/nand/fsl_ifc_spl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
index 2f82f7c..8a7a3a3 100644
--- a/drivers/mtd/nand/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/fsl_ifc_spl.c
@@ -88,7 +88,7 @@ static inline int bad_block(uchar *marker, int port_size)
return __raw_readw((u16 *)marker) != 0xffff;
}
-#ifdef CONFIG_TPL_BUILD
+#if defined(CONFIG_TPL_BUILD) || defined(CONFIG_SPL_BUILD)
int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
#else
static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst)
@@ -221,7 +221,7 @@ static int nand_load(uint32_t offs, unsigned int
uboot_size, void *vdst)
* Defines a static function nand_load_image() here, because non-static makes
* the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes)
*/
-#ifndef CONFIG_TPL_BUILD
+#if !defined(CONFIG_TPL_BUILD) && !defined(CONFIG_SPL_BUILD)
#define nand_spl_load_image(offs, uboot_size, vdst) \
nand_load(offs, uboot_size, vdst)
#endif
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
