Objective of this target to have concatenate binary having
- SPL binary in PBL command format
- U-boot binary
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
---
Changes for v2: Updated target
Makefile | 12 ++++++++++++
README | 4 ++++
2 files changed, 16 insertions(+)
diff --git a/Makefile b/Makefile
index ecac292..6aac95a 100644
--- a/Makefile
+++ b/Makefile
@@ -706,7 +706,11 @@ ALL-y += u-boot.srec u-boot.bin System.map
ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
+ifeq ($(CONFIG_RAMBOOT_SPLPBL),y)
+ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
+else
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
+endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
@@ -835,6 +839,14 @@ OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
$(call if_changed,pad_cat)
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.bin u-boot.bin
+ tools/mkimage -n $(CONFIG_SYS_FSL_PBL_RCW) \
+ -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage \
+ -d $< $@
+ $(OBJCOPY) -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff $@
+ cat u-boot.bin >> $@
+
SPL: spl/u-boot-spl.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/imx-common $@
diff --git a/README b/README
index 413a844..91ef97c 100644
--- a/README
+++ b/README
@@ -486,6 +486,10 @@ The following options need to be configured:
PBI commands can be used to configure SoC before it starts the
execution.
Please refer doc/README.pblimage for more details
+ CONFIG_RAMBOOT_SPLPBL
+ It adds a target to create boot binary having SPL binary in PBI
format
+ concatenated with u-boot binary.
+
CONFIG_SYS_FSL_DDR_BE
Defines the DDR controller register space as Big Endian
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
