Signed-off-by: Dennis Gilmore <den...@ausil.us>
---
include/configs/am335x_evm.h | 109 ++++----------------------------------
include/configs/ti_armv7_common.h | 28 ++--------
2 files changed, 16 insertions(+), 121 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 73a9adb..b7dcb42 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -43,9 +43,9 @@
"nandrootfstype=ubifs rootwait=1\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${fdtaddr} u-boot-spl-os; " \
+ "nand read ${fdt_addr} u-boot-spl-os; " \
"nand read ${loadaddr} kernel; " \
- "bootz ${loadaddr} - ${fdtaddr}\0"
+ "bootz ${loadaddr} - ${fdt_addr}\0"
#else
#define NANDARGS ""
#endif
@@ -55,98 +55,13 @@
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
- "fdtaddr=0x80F80000\0" \
+ "fdt_addr=0x80F80000\0" \
+ "fdt_addr_r=0x80F80000\0" \
"fdt_high=0xffffffff\0" \
- "boot_fdt=try\0" \
- "rdaddr=0x81000000\0" \
- "bootpart=0:2\0" \
- "bootdir=/boot\0" \
- "bootfile=zImage\0" \
- "fdtfile=undefined\0" \
- "console=ttyO0,115200n8\0" \
- "optargs=\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 ro\0" \
- "mmcrootfstype=ext4 rootwait\0" \
- "rootpath=/export/rootfs\0" \
- "nfsopts=nolock\0" \
- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
- "::off\0" \
- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
- "ramrootfstype=ext2\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "spiroot=/dev/mtdblock4 rw\0" \
- "spirootfstype=jffs2\0" \
- "spisrcaddr=0xe0000\0" \
- "spiimgsize=0x362000\0" \
- "spibusno=0\0" \
- "spiargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${spiroot} " \
- "rootfstype=${spirootfstype}\0" \
- "netargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=/dev/nfs " \
- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
- "ip=dhcp\0" \
- "bootenv=uEnv.txt\0" \
- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- "importbootenv=echo Importing environment from mmc ...; " \
- "env import -t $loadaddr $filesize\0" \
- "ramargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${ramroot} " \
- "rootfstype=${ramrootfstype}\0" \
- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcloados=run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loadimage; then " \
- "run mmcloados;" \
- "fi;" \
- "fi;\0" \
- "spiboot=echo Booting from spi ...; " \
- "run spiargs; " \
- "sf probe ${spibusno}:0; " \
- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
- "bootz ${loadaddr}\0" \
- "netboot=echo Booting from network ...; " \
- "setenv autoload no; " \
- "dhcp; " \
- "tftp ${loadaddr} ${bootfile}; " \
- "tftp ${fdtaddr} ${fdtfile}; " \
- "run netargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
- "ramboot=echo Booting from ramdisk ...; " \
- "run ramargs; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+ "ramdisk_addr_r=0x81000000\0" \
+ "kernel_addr_r=0x80200000\0" \
+ "pxe_addr_r=0x80000000\0" \
+ "scriptaddr=0x80000000\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
"setenv fdtfile am335x-bone.dtb; fi; " \
@@ -159,15 +74,13 @@
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use;
fi; \0" \
NANDARGS \
- DFUARGS
+ DFUARGS \
+ BOOTCMDS_COMMON
#endif
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
- "run mmcboot;" \
- "setenv mmcdev 1; " \
- "setenv bootpart 1:2; " \
- "run mmcboot;" \
+ "for target in ${boot_targets}; do run bootcmd_${target}; done" \
"run nandboot;"
/* NS16550 Configuration */
diff --git a/include/configs/ti_armv7_common.h
b/include/configs/ti_armv7_common.h
index 99b60fc..016966a 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -28,7 +28,6 @@
#define CONFIG_SYS_NO_FLASH
/* Support both device trees and ATAGs. */
-#define CONFIG_OF_LIBFDT
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
@@ -40,11 +39,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x80000000
/*
- * Default to a quick boot delay.
- */
-#define CONFIG_BOOTDELAY 1
-
-/*
* DDR information. We say (for simplicity) that we have 1 bank,
* always, even when we have more. We always start at 0x80000000,
* and we place the initial stack pointer in our SRAM.
@@ -101,19 +95,12 @@
* console baudrate of 115200 and use the default baud rate table.
*/
#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "U-Boot# "
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_BAUDRATE 115200
#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
-/* As stated above, the following choices are optional. */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-
/* We set the max number of command args high to avoid HUSH bugs. */
#define CONFIG_SYS_MAXARGS 64
@@ -146,19 +133,14 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_BOOTZ
/*
- * Common filesystems support. When we have removable storage we
- * enabled a number of useful commands and support.
+ * Include the generic config options and boot environment when not
+ * building our SPL
*/
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FS_GENERIC
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#include <config_distro_bootcmd.h>
#endif
/*
--
1.8.5.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
