mmc_spi have dependency of little-endian environment.
So doesn't work big-endian environment.

Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp>
---
 drivers/mmc/mmc_spi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c
index fe6a5a1..17fdac7 100644
--- a/drivers/mmc/mmc_spi.c
+++ b/drivers/mmc/mmc_spi.c
@@ -11,7 +11,7 @@
 #include <spi.h>
 #include <crc.h>
 #include <linux/crc7.h>
-#include <linux/byteorder/swab.h>
+#include <asm/byteorder.h>
 
 /* MMC/SD in SPI mode reports R1 status always */
 #define R1_SPI_IDLE            (1 << 0)
@@ -91,7 +91,7 @@ static uint mmc_spi_readdata(struct mmc *mmc, void *xbuf,
                        spi_xfer(spi, bsize * 8, NULL, buf, 0);
                        spi_xfer(spi, 2 * 8, NULL, &crc, 0);
 #ifdef CONFIG_MMC_SPI_CRC_ON
-                       if (swab16(cyg_crc16(buf, bsize)) != crc) {
+                       if (cpu_to_be16(cyg_crc16(buf, bsize)) != crc) {
                                debug("%s: CRC error\n", mmc->name);
                                r1 = R1_SPI_COM_CRC;
                                break;
@@ -120,7 +120,7 @@ static uint mmc_spi_writedata(struct mmc *mmc, const void 
*xbuf,
        tok[1] = multi ? SPI_TOKEN_MULTI_WRITE : SPI_TOKEN_SINGLE;
        while (bcnt--) {
 #ifdef CONFIG_MMC_SPI_CRC_ON
-               crc = swab16(cyg_crc16((u8 *)buf, bsize));
+               crc = cpu_to_be16(cyg_crc16((u8 *)buf, bsize));
 #endif
                spi_xfer(spi, 2 * 8, tok, NULL, 0);
                spi_xfer(spi, bsize * 8, buf, NULL, 0);
@@ -193,7 +193,7 @@ static int mmc_spi_request(struct mmc *mmc, struct mmc_cmd 
*cmd,
        } else if (cmd->resp_type == MMC_RSP_R2) {
                r1 = mmc_spi_readdata(mmc, cmd->response, 1, 16);
                for (i = 0; i < 4; i++)
-                       cmd->response[i] = swab32(cmd->response[i]);
+                       cmd->response[i] = be32_to_cpu(cmd->response[i]);
                debug("r128 %x %x %x %x\n", cmd->response[0], cmd->response[1],
                      cmd->response[2], cmd->response[3]);
        } else if (!data) {
@@ -205,7 +205,7 @@ static int mmc_spi_request(struct mmc *mmc, struct mmc_cmd 
*cmd,
                case SD_CMD_SEND_IF_COND:
                case MMC_CMD_SPI_READ_OCR:
                        spi_xfer(spi, 4 * 8, NULL, cmd->response, 0);
-                       cmd->response[0] = swab32(cmd->response[0]);
+                       cmd->response[0] = be32_to_cpu(cmd->response[0]);
                        debug("r32 %x\n", cmd->response[0]);
                        break;
                case MMC_CMD_SEND_STATUS:
-- 
1.8.5.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to