With accepted change to DW GMAC driver -
92a190aaab3536d695c51e0739f925910eb49889 (net/designware - switch driver
to phylib usage) we need to update this board because
"designware_initialize" now accepts only 2 parameters instead of 4.
Cc: Vineet Gupta <vgu...@synopsys.com>
Cc: Tom Rini <tr...@ti.com>
Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
---
board/synopsys/axs101/axs101.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/synopsys/axs101/axs101.c b/board/synopsys/axs101/axs101.c
index 4dbeaea..d1271ff 100644
--- a/board/synopsys/axs101/axs101.c
+++ b/board/synopsys/axs101/axs101.c
@@ -36,7 +36,7 @@ int board_mmc_init(bd_t *bis)
int board_eth_init(bd_t *bis)
{
- if (designware_initialize(0, ARC_DWGMAC_BASE, 0,
+ if (designware_initialize(ARC_DWGMAC_BASE,
PHY_INTERFACE_MODE_RGMII) >= 0)
return 1;
--
1.8.5.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
