On Fri, 2014-01-24 at 08:43 +0800, Stephen Warren wrote: > From: Jim Lin <ji...@nvidia.com> > > Fix the timeout issue after running "bootp" command in U-Boot console. > > TXFIFOTHRES bits of TXFILLTUNING register should be set to 0x10 after a > controller reset and before RUN bit is se, (per technical reference > manual.
Stephen, Could you help to replace "," with "t" and put right parenthesis? Like controller reset and before RUN bit is set (per technical reference manual). Thanks, --nvpublic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
